Dr. Sheikh A. Akbar

Visiting Professor
Department of Nanomaterials and Ceramic Engineering
Bangladesh University of Engineering and Technology
Dhaka-1000, Bangladesh
E-mail: sheikhakbar123@gmail.com
Mobile No: +88 01894632182
Phone (Off):- PABX: +880-2-55167100; Ext.: 7477

Dr. Sheikh A. Akbar is a Professor of Materials Science and Engineering and Founder of the National Science Foundation (NSF) Center for Industrial Sensors and Measurements (CISM) at The Ohio State University (OSU) in Columbus, OH, USA. After studying for two years (1973-75) in the Physics Department of Dhaka University (Bangladesh), he completed his MS degree in solid state physics from University of Sofia (Bulgaria) in 1980 and PhD in Materials Engineering from Purdue University (USA) in 1985. His recent work deals with synthesis-microstructure-property relations of ceramic bulk, thin-film and nano-heterostructures. Dr. Akbar was the Chair of the 12th International Conference on Chemical Sensors (IMCS-12) held in 2008. This meeting was attended by 330 participants from more than 30 countries. He was also a major symposium organizer of IMCS-18 in 2021. Dr. Akbar’s sensors received three (3) R&D 100 Awards as part of the 100 best inventions of 2007 and 2005 selected by R&D Magazine and 2005 NASA TGIR (turning goal into reality) award. Dr. Akbar is the recipient of the 2012 Electrochemical Society Sensor Division Outstanding Achievement Award, the 2002 Tan Chin Tuan Fellow of Nanyang Technological University in Singapore, and the 2001 Fulrath Award and the 2002 W.E. Cramer Award of the American Ceramic Society. He was elected a Fellow of the American Ceramic Society in 2001 and a Fellow of the Electrochemical Society in 2018. He also received the 1993 B.F. Goodrich Collegiate Inventors Award for the development of a rugged and durable CO/H2 sensor; one of three national awards. Dr. Akbar has served on the International Advisory Committee of CIMTEC conferences, Steering Committee of the International Conference on Engineering Education (ICEE), Technical Steering Committee of the US-DOE Sensor and Controls Program, and the Steering Committee of the US-Japan Conference on Sensor Systems for the 21st Century. He has co-organized sensor symposia for the American Ceramic Society, the Electrochemical Society, IMCS (USA, Korea, Austria, Canada), ICMAT (Singapore), AMEC-4 (China), ICC3 (Japan), CMCEE (Canada) and ICC8 (Korea). Dr. Akbar has co-edited 2 books on sensors. In 2003, he served as the Guest Editor for two special sections of the Journal of Materials Science, “Chemical Sensors for Pollution Monitoring and Control” and “Chemical and Bioceramics.” He was the Principal Editor of special issues entitled, “Nano-structured Ceramic Oxides: Challenges and Opportunities” and “Energy and Environment: Role of Advanced Materials” published by the American Scientific Publisher in 2011 and 2014, respectively. He was also the Guest Editor of a special issue entitled, “Sensing at the Nano-scale: Chemical and Biosensing” published in 2012 in Sensors and “Nano-hetero-structures for Chemical Sensing: Opportunities and Challenges” published in Frontiers in Materials in 2019. He was a distinguished lecturer in 2017 SJTU International Summer School of Advanced Materials (ISS-AM) in Shanghai, China. Dr. Akbar was elected an Editor of Sensors and Actuators B Chemical in 2018, a role he is continuing. He has served on the Editorial Boards of the Journal of Nanoengineering and Nanomanufacturing, Materials Focus, Sensors, Ceramics International, Journal of Nanomaterials, Sensor Letters and Frontiers in Materials (Functional Ceramics Chief Editor). He has published more than 280 technical papers and holds 8 patents garnering over 14000 citations with an h-index of 55. Dr. Akbar received the Mars G. Fontana Outstanding Teacher Award in Materials Science and Engineering (OSU) for both 2016 and 2017. In 2023, he received the Alumni Distinguished Teaching Award, the highest distinction in teaching at OSU.

Education:
PhD. (1985) - Materials Engineering, Purdue University, West Lafayette, IN, USA
PhD. (1981) - Ph.D. Student (transferred to Purdue), University of Cincinnati, Cincinnati, OH, USA
B.S. & M.S. (1975-80) - B.S. & M.S. in Solid State Physics, University of Sofia, Sofia, Bulgaria
B.S (hons) Student (1973-75) - (continued at University of Sofia), University of Dhaka, Dhaka, Bangladesh

Employment:
1999-present: Professor of Materials Science and Engineering, The Ohio State University, Columbus, OH. Responsibilities include teaching and research in the areas of thermodynamics, kinetics, modeling electrical behavior of ceramics, solid electrolytes, ceramic sensors, thin-films and nano-structures.
1996-1999: Director, Center for Industrial Sensors and Measurements (CISM). Founding Director of a $1 million/year Center funded by the National Science Foundation (NSF), State of Ohio and a consortium of industries.
1993-1999: Associate Professor of Materials Science and Engineering, The Ohio State University, Columbus, OH.
1988-1993: Assistant Professor of Materials Science and Engineering, The Ohio State University, Columbus, OH.

Honors and Awards

2020-21, Distinguished Professor, UKM, Kuala Lumpur, Malaysia

2018 – Editor, Sensors and Actuators B, Elsevier, Switzerland

2018 Fellow, The Electrochemical Society (ECS), USA

2017 Distinguished Lecturer, Zhi-Hong International Summer School of Advanced Materials (ISS-AM), Shanghai Jiao Tong University (SJTU), Shanghai, China

2017 Mars G. Fontana Outstanding Teaching Award in MSE, OSU, Columbus, OH

2016 Invited Speaker, NANO KOREA 2016, July 13-15, Ilshan, Korea

2016 Invited Speaker, IMCS 2016, July 10-13, Jeju Island, Korea

2016 Mars G. Fontana Outstanding Teaching Award in MSE, OSU, Columbus, OH

2013-present, Member, International Advisory Board (IAB) of NANOSMAT

2012-14, ICON Professor, University of Malaya, Kuala Lumpur, Malaysia

2012 Outstanding Achievement Award (international award), Sensor Division, The Electrochemical Society, USA

2011 Plenary Speaker, ISOEN 2011, Rockefeller Center, New York City, USA

2011 Invited Speaker, Korea University, Seoul, Korea

2011 Visiting Professor, Dalian University of Technology, Dalian, China

2011 Invited Speaker, Saudi Aramco, Dhahran, Saudi Arabia

2010-2018, External Advisory Board Member, Center for Nanotechnology, KFUPM, Dhahran, Saudi Arabia

2010 Invited Speaker, University of Western Australia, Perth, Australia

2010 Invited Speaker, Institute of Superconductivity and Electronics Materials, University of Wollongong, Australia

2010 Visiting Consultant, University of Malaya, Kuala Lumpur, Malaysia

2010 Keynote Speaker, The 5th Annual Meeting of the Saudi Physical Society, Abha, KSA

2009 Keynote Speaker, ISFM 2009, Jinju, Korea

2008 Keynote Speaker, NIMS Annual Symposium, Tsukuba, Japan

2009 Visiting Professor, Chonnam National University, Gwangju, Korea

2009 Visiting Professor, Kyungpook National University, Daegu, Korea

2008 Visiting Professor, King Saud University, Riyadh, KSA

2007 R&D 100 Award on NOx sensor, National Award

2006-2008, Chair, 12th International Meeting on Chemical Sensors (IMCS-12)

2007 Visiting Professor, University of Malaya, Kuala Lumpur, Malaysia

2007 Visiting Professor, Korea University, Seoul, Korea

2006 Visiting Professor, King Fahd University of Petroleum and Minerals, Dahran, KSA

2006 Visiting Professor, Harbin Institute of Technology, Harbin, China

2006 “Our Pride Award”, BAFI, USA

2005-2010, Steering Committee Member, 11th IMCS (Italy); 12th IMCS (USA) and 13th IMCS (Australia).

2005, two (2) R&D 100 Awards on O2 sensor, and CO and CO2 sensors for fire detection

2005, NASA TGIR (Turning Goal into Reality) Award for fire detection sensors

2004-2005, Steering Committee Member, US-Japan Conference on Sensor Systems

2004, Visiting Professor, KAIST, Daejon, Korea

International Organizing Committee Member, CMCEE (Vancouver, Canada – 2015),

ICC3 (Japan- 2010), IMCS-13 (Australia-2009-2010), ICMAT (Singapore – 2007),

IMCS-11 (2006 – Italy), AMEC-4 (China – 2005), AMEC-3/ICMAT (Singapore – 2003).

Guest Editor, “Science and Technology of Advanced Materials Applied to Society: Including Collections from the Latest Papers of KRIS 2023”

Guest Editor, “Advanced Functional Nanomaterials for Sensor Applications,”

Chemosensors (2023)

Guest Editor, “Energy and Environment: Role of Advanced Materials,” a special issue published in the Journal of Nanoengineering and Nanomanufacturing (2014)

Guest Editor, “Sensing at the Nano-scale: Chemical and Bio-sensing,” a special issue published in Sensors (2012)

Guest Editor, “Nano-structured Ceramics: Opportunities and Challenges,” a special issue published by American Scientific Publishers (2011)

Guest Editor, “Chemical Sensors for Pollution Monitoring and Control,” Journal of Materials Science, (November, 2003)

Guest Editor, “Chemical and Bio-Ceramics,” Journal of Materials Science, (Dec., 2003)

2002 W.E. Cramer Award, American Ceramic Society Central Ohio Section

2002 Tan Chin Tuan Faculty Fellow, Nanyang Technological University, Singapore

2001 Fulrath Award (national award), American Ceramic Society, USA

2001 Fellow (national award), American Ceramic Society, USA

2000 Invited Speaker, Gordon Conference on Chemical Sensors and Interfacial Design, Ventura Beach, California, Jan. 23-28, 2000

2000 UNDP Consultant, BCSIR, Dhaka, Bangladesh

1999 Outstanding Materials Engineer Award, Purdue University, West Lafayette, IN, USA

1999 Visiting Scholar, Suzuka National College of Engineering, Suzuka, Japan.

1996 Lumley Award, College of Engineering, OSU, USA

1995 UNDP Consultant, BUET, Dhaka, Bangladesh

1993 BFGoodrich Collegiate Inventors Award (one of three national awards), USA

 

Other Professional Activities

Member of OSU Senate (2015-2018)

Member of OSU Senate, Honorary Degrees Selection Committee (2015-17)

Member of University Tenure and Promotion Committee, OSU (2015-18)

Member of Technical Steering Committee, Sensors and Controls, US Department of Energy (2000-2008)

Program Committee Chair, US-Japan Conference of Sensors for the 21st Century (2006)

Executive Committee Member, International conference on Chemical Sensors (IMCS) (2006-current)

Member of Steering Committee, International Conference on Engineering Education (ICEE)

Member of International Advisory Board of CIMTEC, World Ceramic Congress and Forum on New Materials

Member of the International Advisory Board, Encyclopedia of Sensors

Member of Technical Steering Committee, Sensors & Controls, Office of Industrial Technology, Department of Energy, USA

Member of International Advisory Board of SPPM 1997, International Conference on Structure, Processing and Properties of Materials, Bangladesh University of Engineering and Technology, Dhaka, Bangladesh.

Editor, Sensors and Actuators B

Editor, Functional Ceramics, Frontiers in Materials

Member of Editorial Board

Ceramics International

Sensor Letters

Journal of Nanoengineering and Nanomanufacturing

Journal of Nanomaterials

Materials Focus

Sensors

Summer Faculty Fellow: NASA Lewis Research Center, Cleveland, OH (1990)

Collateral Faculty: Ohio Aerospace Institute, Cleveland, OH (1990-1994)

Tutorial Speaker: “High-Temperature Superconductors,” 41st National Aeronautics and

Electronics Conference, Dayton, OH (1989)

Guest Scientist: International Center for Theoretical Physics, Trieste, Italy (1980)

Visiting Professor/Consultant

Nanyang Technological University, Singapore

King Fahd University of Petroleum and Minerals (KFUPM), Dahran, Saudi Arabia

King Saud University, Riyadh, Saudi Arabia

Korean Advanced Institute of Science and Technology (KAIST), Daejon, Korea

University of Malaya, Kuala Lumpur, Malaysia

Korea University, Seoul, Korea

Kyungpook National University, Daegu, Korea

Chonnam National University, Gwangju, Korea

Harbin Institute of Technology, Harbin, China

Dalian University of Technology, Dalian, China

BUET, Dhaka, Bangladesh

BCSIR, Dhaka, Bangladesh

Member: Materials Research Society (MRS), American Ceramic Society (ACerS), Electrochemical Society (ECS), ECS Sensor Division, Bangladesh Ceramic Society (BCerS)

      Symposia Co-organizer:

American Ceramic Society (ACerS), 1996, 1999, 2001, 2002, 2003, 2004, 2005 and 2007

Electrochemical Society, 2005

TMS/ASM/ACerS, MST 2006

MRS-Singapore, 2006, 2007

AMEC -3 (Singapore – 2003); AMEC -4 (China – 2005)

ICMAT (Singapore – 2007)

IMCS – Chair (2008, USA)    Member – Italy (2006), Australia (2010), Korea (2016),       Austria (2018), USA (2020); China (2023)

ICC3 (Japan, 2010)

11th CMCEE (Vancouver, Canada, 2015)

ICC8 (Seoul, Korea, 2020)

ICACC Focused Session 3: Nanostructures and Low-Dimensional Materials for Chemical   Sensors (2022, 2023)

Invited/Keynote Talks at International Meetings: France (1989), Bangladesh (1995, 2000, 2006), India (1999), Italy (1998, 2006), Brazil (1998), Singapore (1998, 2001, 2002, 2007), Czech Republic (1999), Japan (1999, 2002, 2005, 2008), Taiwan (2000), Korea (2000, 2002, 2004, 2007, 2009, 2010, 2011), Norway (2001), China (2005, 2006, 2011, 2017), KFUPM, SA (2002, 2004, 2006), KSU, SA (2007, 2008), Malaysia (2005, 2007, 2010-2014), Australia (2010), Austria (2018), SERI, UKM, Malaysia (2020), e-conf on Phys, Bangladesh (2021), UKM, Malaysia (2021), NANOSYM 2021, PACRIM 14 Vancouver (2021), Materials Summit (2022), 15th National Sensor Conf, China (2023), Alighar Nanotechnology conf, 2022 (India), BUET 2022 (Bangladesh) ICPHMS-2023 (Pakistan)

     

Popular Media: Columbus Dispatch (December, 1995); WOSU (April, 1996); OSU Research (December 1, 2003); The Hindu (December, 2003); Sensors (January, 2004); Business Week (January 19, 2004); Frost & Sullivan (January, 2004); Ceramic Bulletin (March and August, 2004); Ceramic Industry (August, 2005); Voice of America (May 14, 2006); cover page – Journal of Applied Ceramic Technology (IJACT), 3[3],177-192 (2006); OSU Research (July 31, 2013); OSU Today (August 7, 2013); Ceramic Tech (August, 2013); OnCampus (August 22, 2013); Columbus Dispatch (September 29, 2013); Ceramic Bulletin (October, 2013); IMR Newsletter (May, 2014), MSE (OSU) web-page (December, 2016), MSE/OSU webpage (2023), Faculty Focus/OSU (2023), Ohio Sangbad (2023)

 

Publications (Total papers: 260+; total citation – 12,700+; h-index – 52)

  1. Books and Journals Edited
  2. Chemical Sensors for Hostile Environments, G.M. Kale, S.A. Akbar and M. Liu, Eds., Ceramic Transactions, vol. 130, American Ceramic Society (2002).
  3. Chemical Sensors for Pollution Monitoring (special section), S.A. Akbar and C.O. Park, Guest Editors, J. Mater. Sci., vol. 38, No. 21 (2003).
  4. Chemical and Bio-ceramics (special section), S.A. Akbar and C.O. Park, Guest Editors, J. Mater. Sci., vol. 38, No. 23 (2003).
  5. Chemical Sensors 7 and MEMS/NEMS 7, P. Hasketh, G. Hunter, S.A. Akbar, et al., Eds., ECS Transactions, vol. 3, No. 10 (2006).
  6. A. Akbar, A.M. Azad, J.H. Lee and G.M. Kale, “Nano-structured Oxides: Challenges and Opportunities,” Sci. Adv. Mater., 3, 735-738 (2011).
  7. A. Akbar, Sensing at the Nano-scale: Chemical and Biosensing, Sensors 2012, 12, doi:10.3390/s120404962
  8. A. Akbar, A.M. Azad and N. Ali, A Special Issue on Energy and Environment: Role of Advanced Materials, J. Nanoeng. Nanomanuf. 4, 77-79 (2014)
  9. Khosla, S.A. Akbar, J.E. Koehne, P.J. Hesketh, et al., Wearable Sensors and Systems, ECS Transactions, vol. 86, Issues 16 (2018)
  10. A. Akbar, Q. Drmosh and X. Li, “Editorial: Nano-hetero-structures for Chemical Sensing: Opportunities and Challenges,” https://www.frontiersin.org/journals/materials#editorial-board; https://doi.org/10.3389/fmats.2019.00332 (2019).
  11. Refereed Journals
  12. Ishikawa, H. Sato, R. Kikuchi and S.A. Akbar, “Demixing of Materials under Chemical Potential Gradients,” J. Am. Ceram. Soc., 68, 1-6 (1985).
  13. Sato, K. Wada, A. Suzuki and S.A. Akbar, “Percolation Efficiency and Mixed Alkali Effect,” Solid State Ionics, 18&19, 178-182 (1986).
  14. A. Akbar, M. Kaburagi, H. Sato and R. Kikuchi, “Demixing of Oxides under a Temperature Gradient,” J. Am. Ceram. Soc., 70, 246-253 (1987).
  15. A. Akbar, M. Kaburagi and H. Sato, “Soret Effect in Solid, II,” J. Phys. Chem. Solids, 48, 579-586 (1987).
  16. A. Akbar and I.Z. Kostadinov, “Hopping Conduction in Na-b-Alumina,” J. Phys. Chem. Solids, 48, 657-659 (1987).
  17. A. Akbar, “Hopping Conduction in Na-b-Alumina: Temperature Dependence (Technical Note),” J. Phys. Chem. Solids, 49, 585-586 (1988).
  18. Ishikawa, S.A. Akbar, W. Zhu and H. Sato, “Time Evolution of Demixing in Oxides under an Oxygen Potential Gradient,” J. Am. Ceram. Soc., 71, 513-521 (1988).
  19. Sato, S.A. Akbar and T. Ishii, “Frequency Dependence of Hopping Conductivity and Mixed Alkali Effect,” Solid State Ionics, 28-30, 138-141 (1988).
  20. A. Akbar and H. Sato, “Demixing: a Source of Material Deterioration,” J. Phys. Chem. Solids, 50, 729-733 (1989).
  21. C. Wang, K.S. Goto and S. A. Akbar, “Demixing of (Ni,Co)O Under an Oxygen Potential Gradient Using YSZ-Based Galvanic Cell,” J. Electrochem. Soc., 138[12], 3673-3677 (1991).
  22. Mhaisalkar, D.W. Readey and S.A. Akbar, “Microwave Dielectric Properties of Doped BaTi4O9,” J. Am. Ceram. Soc., 74 [8], 1894-1898 (1991).
  23. Mhaisalkar, D.W. Readey, S.A. Akbar, P. Dutta, M. Sumner and R. Rokhlin, “Infrared Reflectance Spectra of Doped BaTi4O9 ,” J. Solid State Chem., 95[2], 275-282 (1991).
  24. Sturm, Z.A. Chaudhury and S.A. Akbar, “Joining of 123 Superconductor,” Matrls. Letters, 12, 316-320 (1991).
  25. Subramanian, S. A.Akbar and K. Goto, “Preparation and Properties of Two-Phase Mixed Conductors of b-Alumina and Iron Oxide,” J. Electrochem. Soc., 139, 2562-2566 (1992).
  26. C. Wang and S.A. Akbar, “Decomposition of YBa2Cu3OxSuperconductor Under Oxygen Potential Gradients Using a YSZ Galvanic Cell,” Matrls. Letters, 13 [4&5] 254-260 (1992).
  27. A. Akbar, “The Path Probability Method: An Atomistic Technique of Diffusion,” J. Matls. Sci., 27, 3125-3132 (1992).
  28. C. Wang and S.A. Akbar, “Demixing of (Ni,Co)O Under an Oxygen Potential Gradient (II),” J. Electrochem. Soc., 139[9], L77-L78 (1992).
  29. Azad, S. Mhaisalkar, L. Birkefeld, S.A. Akbar and K. Goto, “Behavior of a New ZrO2-MoO3Sensor for CO Detection,” J. Electrochem. Soc., 139, 2913-2920 (1992).
  30. M. Azad, S.A. Akbar, S.G. Mhaisalkar L. D. Birkefeld and K.S. Goto, “Solid-State Gas Sensors: A Review,” J. Electrochem. Soc., 139[12], 3690-3704 (1992).
  31. D. Birkefeld, A.M. Azad and S.A. Akbar, “Carbon Monoxide and Hydrogen Detection by Anatase Modification of Titanium Dioxide,” J. Am. Ceram. Soc., 75, 2964 – 2968 (1992).
  32. Zhu and S. A. Akbar, “Mixed Conduction in b-Alumina Type Materials: A Critical Review,” J. Matls. Proc. Tech., 38, 15-27 (1993).
  33. M. Azad, L.D. Birkefeld, S.A. Akbar and M.A. Alim, “Characterization of TiO2-Based Sensor Materials by Immitance Spectroscopy,” J. Am. Ceram. Soc., 77, 481 (1994).
  34. C. Wang and S.A. Akbar, “Diffusion in Ordered Alloys and Intermetallic Compounds,” Acta Metall., 41[10], 2807-2813 (1993).
  35. A. Akbar, “A Generalized View of the Correlation Factor in Solid-State Diffusion,” J. Appl. Phys., 75[6], 2851-2856 (1994).
  36. M. Azad, S.A. Akbar, L.B. Younkman and M.A. Alim, “High-Temperature Immittance Response in Anatase-Based Gas Sensors,” J. Am. Ceram. Soc., 77[12], 3145-3152 (1994).
  37. M. Azad, S. LaRose and S.A. Akbar, “Bismuth Oxide-Based Solid Electrolytes for Fuel Cells,” J. Mater. Sci., 29, 4135-4151 (1994).
  38. K. Dutta, R. Asiaie, S.A. Akbar and W. Zhu, “Hydrothermal Synthesis and Dielectric Properties of Tetragonal BaTiO3,” Chem. Matter., 6, 1542-1548 (1994).
  39. M. Azad, S.A. Akbar and L.B. Younkman, “Ceramic Sensors for Carbon monoxide and Hydrogen,” Interface, 31-34 (December, 1994).
  40. C. Wang and S.A. Akbar, “Determination of Atomistic Parameters and Transport Properties Combining Theory and Experiments of Demixing in (Co,Mg)O,” J. Phys. D: Appl. Phys., 28, 120-128 (1995).
  41. C. Wang, W. H. Chen, V.D. Patton and S.A. Akbar, “A Review on Electrical Properties of High-Temperature Materials: Oxides, Borides, Carbides and Nitrides,” J. Mater. Sci., 30[7], 1627-1641 (1995).
  42. Rahman, C.C. Wang, W. Chen, S.A. Akbar and C. Mroz, “Electrical Resistivity of Titanium Diboride and Zirconium Diboride,” J. Am. Ceram. Soc., 78[5], 1380-82 (1995).
  43. D. Patton, C.C. Wang, S.A. Akbar and M.A. Alim, “The ac Electrical Behavior of Polycrystalline Yttria,” J. Appl. Phys., 78[3], 1757-62 (1995).
  44. C. Wang, V.D. Patton, S.A. Akbar and M.A. Alim, “Effect of Zirconia Doping to the Electrical Behavior of Yttria,” J. Mater. Res., 11[2], 422-429 (1996).
  45. Asiaie, W. Zhu, S.A. Akbar and P.K. Dutta, “Characterization of Submicron Particles of Tetragonal BaTiO3,” Chem. Mater., 8, 226-234 (1996).
  46. Zhu, C.C. Wang, S.A. Akbar and M.A. Alim, “AC Eelectrical Behavior of Hydrothermally Synthesized BaTiO3Ceramics,” Jpn. J. Appl. Phys., 35, 6145-52 (1996).
  47. A. Akbar and C.C. Wang, “High Temperature Sensor Materials,” Interface, 41-43, Dec. (1996).
  48. C. Wang, W.H. Chen, S.A. Akbar and M.A. Alim, “High-Temperature ac Electrical Behavior of Polycrystalline Calcium Zirconate,” J. Mater. Sci., 32[9] 2305-2312 (1997).
  49. Zhu, S.A. Akbar, R. Asiaie and P.K. Dutta, “Sintering and Dielectric Properties of Hydrothermally Synthesized Cubic and Tetargonal BaTiO3Powders,” Jpn. J. Appl. Phys., 36, 214-221 (1997).
  50. A. Akbar and L.B. Younkman, “Sensing Mechanism of a Titania-Based CO Sensor,” J. Electrochem. Soc., 144, 1750-53 (1997).
  51. Zhu, C.C. Wang and S.A. Akbar, “Fast Sintering of Hydrothermally Synthesized BaTiO3Powders and Their Dielectric Properties,” J. Mater. Sci., 32, 4303-4307 (1997).
  52. C. Wang, S.A. Akbar, W. Chen and R.J. Schorr, “High-Temperature Thermistors Based on yttria and calcium zirconate,” Sensors and Actuators A, 58, 237-243 (1997).
  53. A. Chaudhury, T. Ahmed, G. Newaz, L. Wang and S.A. Akbar, “Evaluation of Bond Integrity of a TiO2-Al2O3 Sensor Using Thermal Wave Image Technique,” Mater. Lett., 34, 76-80 (1998).
  54. Zhu, R. Asiaie, P.K. Dutta and S.A. Akbar, “Synthesis, Microstructure and Electrical Properties of Hydrothermally Prepared Ferroelectric BaTiO3Thin Films,” J. Electroceramics, 2[1], 21-31 (1998).
  55. Chiang, C.C. Wang and S.A. Akbar, “Calcium Zirconate for the Monitoring of Hydrocarbons,” Sensors and Actuators B, 46[3], 208-212 (1998).
  56. C. Wang, S.A. Akbar and M.J. Madou, “Ceramic Based Resistive Sensors,” J. Electroceramics, 2[4], 273-282 (1998).
  57. I. Gouma, S.A. Akbar and M.J. Mills, “Microstructural Characterization of Sensors Based on Electronic Ceramic Materials, JOM, 50[11] (1998).
  58. Kohli, C.C. Wang and S.A. Akbar, “Niobium Pentoxide as a Lean-Range Oxygen Sensor,” Sensors and Actuators B, 56, 121-128 (1999).
  59. Holt, M. Rahman, S.A. Akbar, P. Bulusu and C.C. Wang, “Electrode Attachment, Aging and Thermal-Cycling Characteristics of Yttria-Based Thermistors,” Matls. Letter 40, 213-221 (1999).
  60. K. Dutta, A. Ginwalla, B. Hogg, B. Patton, B. Chwieroth, Z. Liang, P. Gouma, M. Mills and S.A. Akbar, “Interaction of Carbon Monoxide with Anatase Surfaces at High Temperatures: Optimization of a Carbon Monoxide Sensor,” J. Phys. Chem. B, 103, 4412-22 (1999).
  61. S. Park, S.W. Kim, E.G. Lee, J.Y. Kim, H.G. Lee and S.A. Akbar, “CO2 Gas Sensor Based on Li2ZrO3 System,” Korean Journal of Mater. Res., 9, 896-899 (1999).
  62. S. Park, J.W. Hong, E.G. Lee, J.Y. Kim and S.A. Akbar, “High Temperature Electrical Behaviors of Li2ZrO3 Thick Films,” Jpn. J. Appl. Phys. Let., 39, L474 – L475 (2000).
  63. Banerjee and S.A. Akbar, “A New Method for Fabrication of Stable and Reproducible Yttria-Based Thermistors,” Sensors and Actuators A, 87, 60-66 (2000).
  64. Lakshminarayanan, C.C. Wang, S.A. Akbar and M.A. Alim, “An In-House Built Thermally Stimulated Current (TSC) Measurement Setup: Strontium Titanate as a Test System,” Jpn. J. Appl. Phys., 39, 4830-4834 (2000).
  65. K.M.S. Chowdhury, S.A. Akbar, S. Kapileshwar and J.R. Schorr, “A Rugged Oxygen Gas Sensor with Solid Reference for High Temperature Applications,” J. Electrochem. Soc., 148, G91-G94 (2001).
  66. Savage, S.A. Akbar and P.K. Dutta, “Titanium Dioxide Based High Temperature Carbon Monoxide Selective Sensor,” Sensors and Actuators B, 72, 239-248 (2001).
  67. Savage, B. Chwieroth, A. Ginwalla, B.R. Patton, S.A. Akbar and P.K. Dutta, “Composite n-p Semiconducting Titanium Oxides as Gas Sensors,” Sensors and Actuators B, 79, 17-27 (2001).
  68. H. Lee, S.A. Akbar and C.O. Park, “Potentiometric CO2 Gas Sensor with Lithium Phosphorous Oxynitride Electrolyte,” Sensors and Actuators B, 80, 234-242 (2001).
  69. Singh, J. Jayaram, M. Madou and S.A. Akbar, “Pyrolysis of Negative Photoresists to Fabricate Carbon Structures for MEMS and Electrochemical Applications,” J. Electrochem. Soc., 149[3], E78-E83 (2002).
  70. Park, S.A. Akbar and J. Hwang, “Selective Gas Detection with Catalytic Filter” Materials Chemistry & Physics, 75 (1-3), 56-60 (2002).
  71. Szabo, H. Du, S.A. Akbar, A. Soliman and P.K. Dutta, “Microporous Zeolite Modified Yttria Stabilized Zirconia (YSZ) Sensors for Nitric Oxide (NO) Determination in Harsh Environments,” Sensors and Actuators B, 82, 142-149 (2002).
  72. Noh, Y. Shin, J. Kim, W. Lee, K. Hong, S.A. Akbar and J. Park, “Effects of NiO addition in WO3-based gas sensors prepared by thick film process,” Solid State Ionics, 152-153, 827-832 (2002).
  73. Narayanan, S.A. Akbar and P.K. Dutta, “A Phosphate-based Proton Conducting Solid Electrolyte Hydrocarbon Gas Sensor,” Sensors and Actuators B, 87, 480-486 (2002).
  74. Lim, X. Chen, W. Lu, W. Zhu and S.A. Akbar, “Structural and Thermal Analyses on Phase Evolution of Sol-gel (Ba,Sr)TiO3 Thin Films,” Surface and Coatings Technology, 167, 203-206 (2003).
  75. O. Park, C. Lee, S.A. Akbar and J. Hwang, “The origin of oxygen Dependence in a potentiometric CO2 sensor with Li-ion conducting electrolytes,” Sensors and Actuators B, 88, 53-59 (2003).
  76. Reddy, P.K. Dutta and S.A. Akbar, “Detection of CO in a reducing, hydrous environment using CuBr as electrolyte,” Sensors and Actuators B, 92, 351-355 (2003).
  77. Reddy, X. Cao, O. Tan, W. Zhu and S.A. Akbar, “Selective detection of ethanol vapor using xTiO2-(1-x)WO3-based sensors,” Sensors and Actuators B, 94, 99-102 (2003).
  78. A. Akbar, P.K. Dutta, B.R. Patton and H. Verweij, “A Research Driven Multidisciplinary Program with Industrial Partnership,” World Transactions on Engineering and Technology Education, 2[2], 241-244 (2003).
  79. Choi, H. Ryu, Y. Seo, W. Lee, K. Hong, D. Shin, J. Park and S. Akbar, “Cauliflower Hillock Formation Through Crystallite Migration of SnO2 Thin Film Prepared on Alumina Substrates by Using MOCVD,” J. Korean Phys. Soc., 43(6), L967-L971 (2003).
  80. Szabo, C. Lee, J. Trimboli, O. Figueroa, R. Ramamoorthy, H. Verweij, P. Dutta, S. Midlam-Mohler, A. Soliman, and S. Akbar, “Ceramic-based Chemical Sensors, Probes and Field-tests in Automotive Engines,” J. Matls. Sci., 38, 4239-4245 (2003).
  81. Ramamoorthy, P. Dutta and S. Akbar, “Oxygen Sensors: Materials, Methods, Designs and Applications,” J. Matls. Sci., 38, 4271-4282 (2003).
  82. O. Park and S.A. Akbar, “Ceramics for chemical sensing,” special issue on “Chemical and Bio-Ceramics,” J. Matls. Sci., 38, 4611-4637 (2003).
  83. O. Park, W. Wepner and S.A. Akbar, “Ceramic Electrolytes and Electrochemical Sensors,” special issue on “Chemical and Bio-Ceramics,” J. Matls. Sci., 38, 4639-4660 (2003).
  84. S. Park, S.A. Akbar, W.S. Lee, K.J. Hong, J. Jung and J.S. Park, “ZnO Sol-gel Derived Porous Films for CO Gas Sensing,” Sensors and Actuators B, 96, 717-722 (2003).
  85. Park, H. Ryu, Y. Seo, W. Lee, K. Hong, D. Shin, S.A. Akbar and J.S. Park, “Annealing Effect of SnO2 Thin-Films,” Jpn. J. Appl. Phys., 42, 7071-7072 (2003).
  86. Yoo, S.A. Akbar and K.H. Sandhage, “Nanocarving of Bulk Titania into Oriented Arrays Single Crystal Nano-fibers via Reaction with Hydrogen-Bearing Gas,” Advanced Materials, 16[3], 260-264 (2004).
  87. Vaed, J. Florkey, S. Akbar, J. Lannutti, S. Cahill and M. Madou, “An Additive Micromolding Approach for the Development of Micro-machined Ceramic Substrates for RF Applications,” J. Microelectromechanical Systems, 13[3], 514-525 (2004).
  88. Yoo, S.A. Akbar and K.H. Sandhage, “Nanocarving of titania (TiO2): a novel approach for fabricating chemical sensing platform,” Ceramics International, 30[7], 1121-26 (2004).
  89. Lee, C. Park and S.A. Akbar, “Comment on potentiometric solid-state CO2 sensor and the role of electronic conductivity of the electrolyte by H. Näfe” Sensors and Actuators B, 105, 124-126 (2005).
  90. Figueroa, C. Lee, S.A. Akbar, P.K. Dutta, N. Sawaki and H. Verweij, “Temperature-controlled CO, CO2 and NOx Sensing in a Diesel Engine Exhaust Stream,” Sensors and Actuators B, 107, 839-848 (2005).
  91. Carney, S. Yoo and S.A. Akbar, “TiO2 – SnO2 Nanostructures and their H2 Sensing Behavior,” Sensors and Actuators B, 108, 29-33 (2005).
  92. Ramamoorthy, S.A. Akbar and P. Dutta, “Dependence of Potentiometric Oxygen Sensing Characteristics on the Nature of Electrodes,” Sensors and Actuators B, 113, 162-168 (2006).
  93. Lee, R. Ramamoorthy, P.K. Dutta and S.A. Akbar, “Mixed Ionic and Electronic Conduction in LiPO4-based CO2 Sensor,” J. Electrochem. Soc., 153 (1), H4-H14 (2006).
  94. Larose and S.A. Akbar, “Electrical Properties of Dense Bi2Al4O9,” J. Solid State Electrochem., 10[7], 488-498 (2006).
  95. M. Azad and S.A. Akbar, “Novel Structural Modulation in Ceramic Sensors via Gas Phase Reconstitution,” Journal of Applied Ceramic Technology (IJACT), 3[3],177-192 (2006).
  96. A. Akbar, P.K. Dutta and C.H. Lee, “High Temperature Ceramic Gas Sensors: a Review,” International Journal of Applied Ceramic Technology (IJACT), 3[4], 302-311 (2006).
  97. Lee, N. Szabo, R. Ramamoorthy, P. Dutta and S. Akbar, “Solid-State Electrochemical Sensors: Opportunities and Challenges,” in Encyclopedia of Sensors, Eds. C.A. Grimes, E.C. Dickey and M.V. Pishko, vol. 10, pp.1-20 (2006)
  98. Yoo, S. Dregia, S.A. Akbar, H. Rick and K.H. Sandhage, “Etching mechanism of TiO2 nano-fiber formation with hydrogen gas,” J. Mater. Res., 21[7], 1822-1829 (2006).
  99. M. Azad and S.A. Akbar, “Novel Structural Modulation in Ceramic Sensors via Redox Processing in Gas Buffers,” International Journal of Applied Ceramic Technology (IJACT), 3, 177-192 (2006).
  100. Choi, Young Jin; Seeley, Zachary; Bandyopadhyay, Amit; Bose, Susmita; Akbar Sheikh A., “Aluminum-doped TiO2 nano-powders for gas sensors.” Sensors and Actuators, B: Chemical, 124(1), 111-117 (2007).
  101. Spirig, John V.; Ramamoorthy, Ramasamy; Akbar, Sheikh A.; Routbort, Jules L.; Singh, Dileep; Dutta, Prabir K.  High temperature zirconia oxygen sensor with sealed metal/metal oxide internal reference.    Sensors and Actuators, B: Chemical,  B124(1),  192-201 (2007).
  102. Akbar Sheikh A.; Dutta, Prabir K. “Development and application of gas sensing technologies for combustion processes.”  PowerPlant Chemistry,  9(1),  28-33 (2007).
  103. Zhang, Pengbei; Lee, Chonghoon; Verweij, Henk; Akbar, Sheikh A.; Hunter, Gary; Dutta, Prabir K., “High temperature sensor array for simultaneous determination of O2, CO, and CO2 with kernel ridge regression data analysis.” Sensors and Actuators, B: Chemical, B123(2),  950-963 (2007).
  104. Rauscher, S.A. Dregia, A. Boyne and S.A. Akbar, “Self-Assembly of Pseudo-Periodic Arrays of Nano-Islands on YSZ-(001)” Advanced Materials, 20[9], 1699-1705 (2008).
  105. M. Azad, S. Dolan and S.A. Akbar, “Development of Agile Titania Sensors via High Temperature Reductive Etching Process (HiTREP©): I. Structural Reorganization” International Journal of Applied Ceramic Technology (IJACT), 5[5], 480-489 (2008).
  106. Yoo and S.A. Akbar, “Ceramic Nano-structures by Gas-phase Reaction,” J. Electroceramics, 21(1-4), 103-109 (2008).
  107. Lee and S.A. Akbar, “Sensing behavior of TiO2 thin-film prepared by rf reactive sputtering,” Sensors Letter, 6, 1049-1053 (2008).
  108. Carney, Y. Cai, S. Yoo, K.H. Sandhage and S.A. Akbar, “Reactive Conversion of Microcrystalline SnO2 into Single Crystal SnO2 Nanofibers at Low Oxygen Partial Pressures,” Journal of Materials Research, 23[10], 2639-2644 (2008).
  109. Hae-Ryong Kim, Kwon-Il Choi, Jong-Heun Lee, and Sheikh A. Akbar,
    “Highly sensitive and ultra-fast responding gas sensors using self-assembled hierarchical SnO2 spheres, Sensors and Actuators B. 136, 138-143 (2009)
  110. Lee, S.A. Akbar and P.K. Dutta, “High Temperature Carbon Dioxide Sensor with Minimal Interference to Humidity,” Sensors and Actuators B 142, 337-341 (2009).
  111. Dinan and S.A. Akbar, “One Dimensional Oxide Nanostructures by Gas-phase Reaction,” Functional Nanomaterials Letters, 2[3], 87-94 (2009).
  112. Lee, S. Dregia, S. Akbar, and M. Alhoshan, “Growth of 1-D TiO2 Nanowires on Ti and Ti Alloys by Oxidation,” Journal of Nanomaterials, vol. 2010, Article ID 503186, 7 pages, 2010. doi:10.1155/2010/503186
  113. Liu, D. Li, J. Wu, X. Li and S.A. Akbar, “A Selective Room Temperature Formaldehyde Gas Sensor Utilizing TiO2 Nanotube Arrays,” Sensors and Actuators B 156(2), 505-509 (2011).
  114. A. Akbar, S. Yoo, C. Carney, H. Lee, B. Dinan and S.A. Dregia “1-D TiO2 and SnO2 Nano-structures and Their Applications in Gas Sensing,” Encyclopedia of Semiconductor Nanotechnology, American Scientific Publishers, Ed. Ahmad Umar, vol. 7, Chapter 5, pp. 1-23 (2011).
  115. Andio, E. Beach, P. Morris and S.A. Akbar, “Synthesis and Deposition via Ink-Jet Printing of Nano-structured Metal-Oxides on Microhotplate Substrates,” Special Section on Nano-structured Oxides: Challenges and Opportunities, Sci. Adv. Mater., 3, 845-852 (2011).
  116. Ansari and S.A. Akbar, “Self-assembly of Nano-islands in Oxide Ceramics,” Special Section on Nano-structured Oxides: Challenges and Opportunities, Sci. Adv. Mater., 3, 821-844 (2011).
  117. A. Andio, P.N. Browning, P.A. Morris and S.A. Akbar, “Comparison of Gas Sensor Performance of SnO2 Nano-structures on Microhotplate Platforms,” Sensors and Actuators B, 165, 13-18 (2012).
  118. W. Tan, B. Murphy, R. Ahmed and S.A. Akbar, “Review of titania nanotubes: Fabrication and cellular response,” Ceramics International, 38, 4421-4435 (2012).
  119. Arafat, B. Dinan, ASMA Haseeb and S.A. Akbar, “Gas sensors based on 1D nano-structures: a review,” Sensors special issue entitled, “Sensing at the Nano-scale: Chemical and Bio-sensing”, Sensors, 12, 7207-7258 (2012).
  120. Wu, J. Zhang, X. Wang, J. Liao, H. Xia, S.A. Akbar, J. Li, S. Lin, X. Li and J. Wang, “Hierarchichal Structured TiO2 Nano-tubes for Formaldehyde Sensing,” Ceramics International, 38, 6341-6347 (2012).
  121. S. Parikh, S.S. Rao, H. Ansari, L.B. Zimmerman, L.J. Lee, S.A. Akbar, J.O. Winter, “Ceramic Nanopatterned Surfaces to Explore the Effects of Nanotopography on Cell Attachment,” Materials Science and Engineering C. 32: 2469–2475 (2012).
  122. Dinan, D. Gallego-Perez, H. Lee, D. Hansford and S. A. Akbar, “Thermally Grown TiO2 Nanowires to Improve Cell Growth and Proliferation on Titanium Based Materials,” Ceramics International, 39, 5949-5954 (2013).
  123. Dinan, S.A. Dregia and S.A. Akbar, “Growth of Co-axial Nanowires by Thermal Oxidation of Ti64 Alloy,” Materials Technology, 28[5], 280-285 (2013).
  124. Yoon, G. Hunter, S.A. Akbar and P.K. Dutta, “Interface reaction and its effect on performance of a CO2 sensor based on Li0.35La0.55TiO3 electrolyte and Li2CO3 sensing electrode,” Sensors and Actuators B, 182, 95-103 (2013).
  125. M. Arafat, A.S.M.A. Haseeb, B. Dinan and S.A. Akbar, “Stress Enhanced TiO2 Nanowire Growth on Ti-6Al-4V Particles by Thermal Oxidation,” Ceramics International, 39, 6517-6526 (2013).
  126. M. Ansari, V. Dixit, L.B. Zimmerman, M.D. Rauscher, S.A. Dregia and S.A. Akbar, “Self-assembly of nano-islands on (001) YSZ surface: a mechanistic approach toward a robust process,” Nano Letters, 13, 2116-2121 (2013).
  127. Ansari, M.D. Rauscher, S. Dregia and S.A. Akbar, “Epitaxial pore-free gadolinia-doped ceria thin films on yttria-stabilized zirconia by RF magnetron sputtering,” Ceramics International, 39, 9749-9752 (2013).
  128. Ning Chen, Xiaogan Li, Xueyan Wang, Jun Yu, Jing Wang, Zhenan Tang and A.Akbar, “Enhanced Room Temperature Sensing of Co3O4-Intercalated Reduced Graphene Oxide Based Gas Sensors,” Sensors and Actuators B 188, 902-908 (2013).
  129. Arafat, S.A. Akbar and ASMA Haseeb, Developments in Semiconducting Oxide Based Gas Sensing Materials,” in Comprehensive Materials Processing, Volume: 13: Sensor Materials and Technologies, Elsevier (2013).
  130. W. Tan, B. Murphy, R. Ahmed and S.A. Akbar, “Advances in fabrication of TiO2 nanofibre/nanowire arrays toward cellular response for biomedical implantations: a review,” Journal of Materials Science 48 (24), 8337-8353 (2013).
  131. Tharsika, A.S.M.A. Haseeb, S.A. Akbar, M.F.M. Sabri, Co-synthesis of ZnO/SnO2 mixed nanowires via a single-step carbothermal reduction method, Ceramics International vol. 40 (3), 5039-5042 (2014).
  132. Tharsika, A.S.M.A. Haseeb, S.A. Akbar, M.F.M. Sabri, Catalyst free single-step fabrication of SnO2/ZnO core-shell nanostructures, Ceramics International vol. 40 (5), 7601-7605 (2014).
  133. W. Tan, A. Dalillottojari, B. Murphy, R. Ahmad and S. Akbar, “In vitro chondrocyte interactions with TiO2 nanofibers grown on Ti-6Al-4V substrate by oxidation,” Ceramics International, 40 (6), 8301-8304 (2014).
  134. K. Dutta and S.A. Akbar, “Solid-State Electrochemical Gas Sensors: Recent Developments,” Encyclopedia of Applied Electrochemistry, 973-981 (2014).
  135. Lee, H. Lee and S.A. Akbar, “CO Sensor Based on Au–TiO2Nanowires Prepared by Conventional Heat-Treatment,” Sensor Letters, 11 (12), 2287-2290 (2014).
  136. Miller, S.A. Akbar and P. Morris, “Nanostructured Metal Oxide Heterojunctions for Gas Sensing: A Review,” Sensors and Actuators B, 204, 250-272 (2014).
  137. M. Arafat, ASMA Haseeb and S.A. Akbar, “Selective Ultrahigh Responding High Temperature Ethanol Sensor Using TiO2 Nanoparticles,” Sensors, 14(8), 13613-13627 (2014).
  138. Tharsika, A.S.M.A. Haseeb, S.A. Akbar, M.F.M. Sabri, Y.H. Wong, “Enhanced ethanol gas sensing properties of SnO2-core / ZnO-shell nanostructures,” Sensors, 14(8), 14586-14600 (2014).
  139. W. Tan, R. Ismail, K.H. Chua, R. Ahmad, S.A. Akbar and B. Murphy, Osteogenic potential of insitu TiO2 nanofibrous surfaces formed by thermal oxidation of titanium alloy substrate, Applied Surface Science, 320, 161-170 (2014).
  140. W. Tan, B. Murphy, R. Ahmad and S.A. Akbar, Proliferation and stemness preservation of human adipose-derived stem cells by surface modified in situ TiO2 nanofibrous surfaces, International Journal of Nanomedicine, 9, 5389-5401 (2014).
  141. Tharsika, A.S.M.A. Haseeb, S.A. Akbar, M.F.M. Sabri, Y.H. Wong, Synthesis, characterization and gas sensing properties of zinc stannate (Zn2SnO4) nanowires, Journal of Alloys and Compounds, 618, 455-462 (2015).
  142. Tharsika, T.; Haseeb, A. S. Md. Abdul; Akbar, S. A.; Thanihaichelvan, M., “Tailoring ZnO Nanostructures by Spray Pyrolysis and Thermal Annealing,” Ceramics International, 41, 5205-5211 (2015).
  143. M. Arafat, ASMA Haseeb and S.A. Akbar, “Growth and Characterization of the Oxide Scales and Core/Shell Nanowires on Ti-6Al-4V Particles during Thermal Oxidation,” Ceramics International, 41, 4401-4409 (2015).
  144. Miller, S. Akbar, P. Morris, R. Williams and D. McComb, “Correlative STEM-Cathodoluminescence and Low-loss EELS of Semiconducting Oxide Nano-structures for Resistive Gas Sensing Applications,” Microscopy and Microanalysis, vol. 21 (supplement S3), pp. 1255-1256 (August, 2015).
  145. Nur Izzati Aminuddin, Roslina Ahmad, Haris Masood Ansari, Norita Mohd. Zain, Sheikh Ali Akbar, Belinda Pingguan-Murphy, Human fetal osteoblast cell response to self-assembled nanostructures on YSZ-(110) single crystal substrates, (2016), Materials Design, S0264-1275(15)31031-5, doi: 1016/j.matdes.2015.12.173
  146. Pingguan-Murphy, Belinda (*); Aminuddin, Nur Izzati; Ahmad, Roslina; Akbar, Sheikh Ali: “Osteoblast and stem cell response to nanoscale topographies: a review”, Science and Technology of Advanced Materials Vol. 17 (2016) p. abcdefg.http://dx.doi.org/10.1080/14686996.2016.abcdefg
  147. W. Tan, B. Murphy, R. Ahmad and S.A. Akbar “Enhanced in vitro angiogenic behaviour of human umbilical vein endothelial cells on thermally oxidized TiO2 nanofibrous surfaces.” Accepted in Scientific Reports, Nature Publishing (2015).
  148. Li, Y. Zhao, X. Wang, J. Wang, A.M. Goskov and Sheikh A. Akbar, “Reduced Graphene Oxide (rGO) Decorated With TiO2 Microspheres For Selective Room-Temperature Gas Sensors,” Sensors & Actuators: B. Chemical (2016), pp. 330-336 DOI information: 10.1016/j.snb.2016.02.069.
  149. Ginny Soon, Belinda Pingguan-Murphy, Khin Wee Lai, Sheikh Ali Akbar, “Review of Zirconia-Based Bioceramic: Surface Modification and Cellular Response,” Ceramics International, Volume 42, Issue 11, 15 August 2016, Pages 12543–12555.
  150. Schipani, F., Miller, D. R., Ponce, M. A., Aldao, C. M., Akbar, S. A. and Morris, P. A., “Electrical Characterization of Semiconductor Oxide-based Gas Sensors Using Impedance Spectroscopy: a Review,” Reviews in Advanced Sciences and Engineering, ASP, vol. 5, pp. 88-105 (2016).
  151. Jing Wang, Lin Zhao; Xiaogan Li; Pengjun Yao; Sheikh A. Akbar, “Detection of Formaldehyde In Mixed VOCs Gases Using Sensor Array with Neural Networks,” IEEE Sensors, 16 [15], 6081-6086 (2016).
  152. Izzati, R. Ahmad, H. Ansari, N. Zain, S, Akbar, B. Murphy, “Human osteoblast cell response to self-assembled nano-structures on YSZ-(110) single crystal substrates,” Materials and Design, 94, 274-279 (2016).
  153. Arafat, ASMA Haseeb, M. Quadir, S. Akbar, “In-situ Fabricated Gas Sensors Based on One Dimensional Core-Shell TiO2-Al2O3 Nanostructures,” Sensors and Actuators B, 238, 972-984 (2017).
  154. R. Miller, R.E. Williams, S.A. Akbar, P.A. Morris, D.W. McComb, “STEM-Cathodoluminescence of SnO2 nanowires and powders,” Sensors Actuators B Chem. 240, 193-203 (2017).
  155. Schipani, D.R. Miller, M.A. Ponce, C.M. Aldao, S.A. Akbar, P.A. Morris, J.C. Xu, “Conduction mechanisms in SnO2 single-nanowire gas sensors: An impedance spectroscopy study,” Sensors Actuators B Chem. 241, 99-108 (2017).
  156. M. Ansari, Z. Niu, G. Chen, S.A. Dregia and S.A. Akbar, “Spontaneous surface rippling and subsequent polymer molding of YSZ-(110) surfaces,” ACS Nano, 11[2], 2257-2265 (2017)
  157. Zhiyuan Niu, Haris M. Ansari, Enam A. Chowdhury, Suliman A. Dregia and Sheikh A. Akbar, “Step faceting and nanoisland formation on miscut YSZ-(001) surfaces,” Applied Surface Science, vol. 407, 192-196 (2017).
  158. Ginny, B.P. Murphy and S.A. Akbar, “Modulation of osteoblast behavior on nanopatterned yttria-stabilized zirconia surfaces.” Journal of the Mechanical Behavior of Biomedical Materials, accepted Jan 21, 2017, DOI: 10.1016/j.jmbbm.2017.01.028.
  159. A. Akbar, “Surface Patterning of Functional Ceramics: a Materials Design,” Frontiers in Materials, Specialty Grand challenge, published: 11 January 2017 doi:10.3389/fmats.2016.00062
  160. Derek R. Miller, Sheikh A. Akbar and Patricia A. Morris, “Synthesis of hierarchical SnO2 nanowire-TiO2 nanorod brushes anchored to FTO-coated glass substrates,” Nano-Micro Letters, 9(3), 33 (2017). doi:10.1007/s40820-017-0136-6
  161. Derek R. Miller, Robert E. Williams, Sheikh A. Akbar, Pat A. Morris and, David W. McComb “Measuring optical properties of individual SnO2 nanowires and nanoparticles via valence electron energy-loss spectroscopy,” J. Mater. Res., 32[13], 2479-2486 (2017).
  162. Derek R. Miller and Sheikh A. Akbar, “Nano-Heterostructure Metal Oxide Gas Sensors: Opportunities and Challenges,” Reference Module in Materials Science and Materials Engineering, Oxford, Elsevier, pp. 1-5 (2017).
  163. BuYu Yeh, Mohamad Al-Hashem, Sheikh Akbar and Patricia Morris, “Flexible Metal Oxide-based Sensors,” Chapter 3 in Nanomaterial-based Flexible and Multifunctional Sensors, Eds., Eric Singh and Hari Singh Nalwa, pp. 113-160, American Scientific Publishers (2018).
  164. Janine Walker, Sheikh Akbar and Patricia Morris, “Synergistic Effects in Gas Sensing Semiconducting Oxide Nano-Heterostructures: a Review,” Sensors and Actuators B, 286, 624-640 (2019).
  165. Priyanka Karnati, Sheikh Akbar and Patricia Morris, “Core-shell heterostructure in metal oxide gas sensors: a review,” Sensors and Actuators B, 295, 127-143 (2019).
  166. Tharsika, T. Murugathas, ASMA Haseeb and S. Akbar, “Highly sensitive and selective ethanol sensor based on ZnO nanorod on SnO2 thin film fabricated by spray pyrolysis,” Frontiers in Materials, https://doi.org/10.3389/fmats.2019.00122
  167. Mohamad Al-Hashem, Sheikh Akbar and Patricia Morris, “Role of Oxygen Vacancies in Nanostructured Metal-Oxide Gas Sensors: A Review,” Sensors and Actuators B, (2019). doi: https://doi.org/10.1016/j.snb.2019.126845.
  168. Ding Gu, Xueyan Wang, Shiwei Lin, Jing Wang, Marina Rumyantseva, Alexander M. Gaskov and Sheikh Akbar, “Photo-energy Activated NO2 Sensing of SnS2 Nanosheets Based Chemiresistive Sensors at Room Temperature,” Sensors and Actuators B (2019). doi: https://doi.org/10.1016/j.snb.2019.127455.
  169. Karnati, J. Walker, M. Al-Hashem, D. Miller, S. Akbar, and P. Morris, “Comparison of electrical measurements of nanostructured gas sensors using wire bonding vs. probe station,” Meas. J. Int. Meas. Confed., vol. 153, p. 107451, Mar. 2020
  170. W. Hunter, S. A. Akbar, et al., “A Critical Review of Solid State Gas Sensors,” Journal of the Electrochemical Society, vol. 167, number 3 Focus Issue, 037570 (2020).
  171. Janine Walker, Priyanka Karnati , Derek R. Miller, Mohamad Al-Hashem, Sheikh A. Akbar, Patricia A. Morris, “A new open-access online database for resistive-type gas sensor properties and performance,” Sensors and Actuators B (2020); https://doi.org/10.1016/j.snb.2020.128591
  172. A. Drmosh, I.O. Aladeb, M. Qamar and Sheikh Akbar, “Zinc Oxide-Based Acetone Gas Sensors for Breath Analysis: A Review,” Chemistry, an Asian Journal, 10 May 2021, Chem Asian J. 2021, 16,1–21; DOI: 10.1002/asia.202100303PMID: 33970556
  173. Derek R. Miller and Sheikh A. Akbar, “Nano-Heterostructure Metal Oxide Gas Sensors: Opportunities and Challenges,” Encyclopedia of Smart Materials, Volume 3 doi:10.1016/B978-0-12-815732-9.10301-8
  174. Ahmed A. Ibrahim, R. Kumar, Hassan Algadi, Hasan Albargi, Wen Zeng, Ahmad Umar and Sheikh Akbar, “CdO-ZnO nanorices for enhanced and selective formaldehyde gas sensing applications,” Environmental Research, vol. 200, 111377 (September, 2021).
  175. M. Arafat, B. Dinan, A. S. M. A. Haseeb, S. A. Akbar, S. Rozali, “Growth of 1D TiO2 Nanostructures during Humid Oxidation of Ti under Residual Stress and their Characterizations,” Nanotechnology, 32 (47), (19 Nov 2021).
  176. Ahmad Umar, Ahmed A. Ibrahim, Hassan Algadi, Yao Wang and Sheikh Akbar, “Enhanced NO2 gas sensor based on supramolecularly assembled polyaniline/silver oxide/graphene oxide composites,” Ceramics International, 47(18):25696 (15 Sep 2021).
  177. Ahmad Umar, Ahmed A. Ibrahim, Hassan Algadi, Yao Wang and Sheikh Akbar, “Supramolecularly assembled isonicotinamide/reduced graphene oxide nanocomposite for room temperature NO2 gas sensor,” Environmental Technology and Innovation, 25: 01 Feb 2022.
  178. Walker, P. Karnati, S.A. Akbar and P. Morris, “Selectivity mechanisms in resistive-type metal oxide heterostructural gas sensors,” Sensors and Actuators B; 255, 15 Mar 2022. https://doi.org/10.1016/j.snb.2021.131242 (March 15, 2022).
  179. Manisha Kumari, Ganga Ram Chaudhary, Savita Chaudhary, Ahmad Umar, Sheikh Akbar, Sotirios Baskoutas, “Bio-derived fluorescent Carbon dots: Synthesis, properties and application”, Molecules, 27, 5329 (2022).
  180. Yajvinder Saharan, Joginder Singh *, Rohit Goyat, Ahmad Umar *, Sheikh Akbar, “Novel Hydrophobic Polyvinyl-Alcohol Formaldehyde Nanosponges: Synthesis, Characterization, Fast and Effective Organic solvents Uptake from contaminated soil samples”, Molecules, 27, 8429 (2022).
  181. Pranjal Srivastava, Sadanand, Shambhavi Rai, Pooja Lohia, D. K. Dwivedi, Hussam Qasem, Ahmad Umar, Sheikh Akbar, Hassan Algadi, Sotirios Baskoutas, “Theoretical study of perovskite solar cell for enhancement of device performance using SCAPS-1D”, Physica Scripta, 97, 125004 (2022).
  182. Ahmad Umar, Sheikh Akbar, Ahmed A. Ibrahim, Hassan Algadi, Moaaed Motlak, Mohsen A.M. Alhmami, Mohd Ubaidullah, M. Shaheer Akhtar, “Electrospun Co3O4 Nanofibers as Potential Electrocatalytic Material for Enhanced Supercapacitor and Chemo-sensor Applications”, Journal of Materials Research and Technology, 21, 5018-5031 (2022).
  183. Rohit Goyat; Joginder Singh; Ahmad Umar; Yajvinder Saharan; Vikas Kumar; Hassan Algadi; Sheikh Akbar and Sotirios Baskoutas, “Modified Low-Temperature Synthesis of Graphene Oxide Nanosheets: Enhanced Adsorption, Antibacterial and Antioxidant Properties”, Environmental Research, 215, 11445 (2022).
  184. Rohit Goyat, Yajvinder Saharan, Joginder Singh, Ahmad Umar *, Sheikh Akbar, “Synthesis of Graphene and based nanocomposites for environmental remediation applications: A review”, Molecules, 27, 6433 (2022).
  185. K. Abd El-Rahman, Nuha A Alhebshi, N M. Basfer, Y. Al-Hadeethi, Ahmad Umar, Sheikh Akbar, “Applications of Nanomaterials in Microbial Fuel Cells: A Review,” Molecules, 27, 7483 (2022).
  186. Ahmad Umar, Ahmed A. Ibrahim, Mohsen A. Alhamami, Hassan Algadi, Faheem Ahmed, S. Hussain, Hassan Fouad, and Sheikh Akbar, “ZnO nanorods assembled microflower-based gassensor for detecting formaldehyde,” Materials Express 12, 1481-1487 (2022).
  187. Ahmad Umar, Faheem Ahmed, Hassan Algadi, Ahmed A. Ibrahim, Mohsen A. Alhamami, Hussam Qasem5, and Sheikh Akbar, “Single crystalline a-manganese dioxide (a-MnO2) nanowires as anode materials for lithium-ion batteries,” Materials Express, 12, 1560-1565 (2022).
  188. Ahmad Umar, Pravin Kumar Singh, Sadanand, D. K. Dwivedi5, Ahmed A. Ibrahim, Mohsen A. M. Alhamami, Hussam Qasem, Sheikh Akbar, and S. Baskoutas, “Design and Simulation of Lead-Free Perovskite Solar Cells with a Hole Transport Layer Made of NiO Nanocomposite,” Science of Advanced Materials, 14, 1511-1517 (2022).
  189. Vaishali Yadav; Vaibhava Srivastava; Sadanand Sadanand; Pooja Lohia; D.K. Dwivedi; Hussam Qasem; Ahmad Umar; Sheikh Akbar; Sotirios Baskoutas, ” Simulation of efficient PbS colloidal quantum dot solar cell using Spiro-OMeTAD as hole transport layer”, Science of Advanced Materials, 14, 1741-1749 (2022).
  190. Digambar Nadargi, Ahmad Umar, Jyoti Nadargi, Jayvant Patil, Imtiaz Mulla, Sheikh Akbar, and Sharad Suryavanshi, ” Spinel magnesium ferrite (MgFe2O4): a glycine assisted colloidal combustion and its potentiality in gas sensing application”, Chemosensors, 10, 361 (2022).
  191. Digambar Y. Nadargi; Ahmad Umar; Jyoti D. Nadargi; Smita A. Lokare; Sheikh Akbar; Imtiaz S. Mulla; Sharad S. Suryavanshi; Nagesh L. Myadam; Manohar G. Chaskar, “Gas sensors and factors influencing sensing mechanism with a special focus on MOS sensors: a review”, J Mater Sci, 58, 559-582 (2023).
  192. Yajvinder Saharan, Joginder Singh, Rohit Goyat, Ahmad Umar, Ahmed A. Ibrahim, Sotirios Baskoutas, “Novel Supramolecular Organo-Oil Gelators for Fast and Effective Oil Trapping: Mechanism and Applications”, Journal of Hazardous Materials, 442, 129977 (2023).
  193. Faheem Ahmed, Thangavelu Kokulnathan, Ahmad Umar, Sheikh Akbar, Shalendra Kumar, Nagih Mohammed Shaalan, Nishat Arshi, Mohd Gulfam Alam, Abdullah Aljaafari, Adil Alshoaibi, “Construction of Zinc Oxide/Phosphorus-Doped Carbon Nitride Nanocomposite for Electrochemical Detection of Nitrofurantoin,” in print, Biosensors (2022).
  194. Pooja Tiwari; Vaibhava Srivastava; Sadanand Sadanand; Pooja Lohia; D.K. Dwivedi; Hussam Qasem; Ahmad Umar; Sheikh Akbar; Hassan Algadi; Sotirios Baskoutas, ” Modelling and simulation of SnS based solar cell using ZnO as TCO and NiO as HTL”, in print, Micromachines (2022).
  195. K. Abd El-Rahman, Nuha Al-Harbi, Yas Al-Hadeethi, Adel Bandar Alruqi, Hiba Mohammed, Ahmad Umar, Sheikh Akbar, “Influence of Nano-materials and Other Factors on Bio-Hydrogen Production Rates in Microbial Electrolysis Cells – A Review,” in print, Molecules (2022).
  196. Savita Chaudhary, Manisha Kumari, Pooja Chauhan, Ganga Ram Chaudhary, Ahmad Umar, Sheikh Akbar and Sotirios Baskoutas, “Solvatochromism as novel tool to enumerate the optical and luminescence properties of plastic waste derived Carbon nanodots and their activated counterparts,” in print, Nanomaterials (2023).
  197. Sonali L. Darshane, Digambar Y. Nadargi, Sharad S. Suryavanshi, Rajeev C. Chikate, Imtiaz S. Mulla, Ahmad Umar and Sheikh A. Akbar, “Highly sensitive and selective ethanol and hydrogen sulphide gas sensors based on Cu-doped Indium oxide nanostructures”, submitted to Applied Sciences (2022).
  198. Mohammad Jamir Ahemad, Dong-Seog Kim, Thanh Duc Le, Lakshmana Reddy Nagappagari, Geun-Jae Oh, Gi-Seung Shin, Ahmad Umar, Sheikh Akbar, and Yu Yeon Tae, “Understanding the Enhancement of Catalytic Activity with Thermal Stability in MOS-Supported Silver-Palladium Alloy Nanoparticles for Enhanced Gas Sensing “, submitted to Sensors and Actuators B (2022).
  199. Ahemad, Mohammad Jamir; Kim, Dong-Seog ; Duc Le, Thanh; Nagappagari, Lakshmana Reddy; Oh, Geun-Jae ; Shin, Gi-Seung ; Ahmad, Umar; Akbar, Sheikh; Yu, Yeon-Tae, “Thermally Stable AgPd@ZnO Bimetallic Alloy Nanoparticles for Ethanol Sensors with Long-Term Stability”, submitted to ACS Applied Nano Materials (2022).
  200. Mohammad Jamir Ahemad, Dong-Seog Kim, Thanh Duc Le, Lakshmana Reddy Nagappagari, Geun-Jae Oh, Gi-Seung Shin, Ahmad Umar, Sheikh Akbar, and Yu Yeon Tae, “Highly-Sensitive MOS Sensors with Enhanced Oxidation Resistance for VOCs Gases based on Engineered Silver-Palladium Alloyed Nanoparticles,” submitted to Chemical Engineering Journal (2022).
  201. Mohammad Jamir Ahemad, Dong-Seog Kim, Thanh Duc Le, Lakshmana Reddy Nagappagari, Geun-Jae Oh, Gi-Seung Shin, Ahmad Umar, Sheikh Akbar, and Yu Yeon Tae, “Engineering Silver-Palladium Alloy Catalysts supported by MOS with Enhanced Oxidation Resistance for VOCs sensing,” submitted to ACS Applied Nano Materials (2022).
  202. Digambar Nadargi, Ahmad Umar, Jyoti Nadargi, Mohaseen Tamboli, Asiya Tamboli, Sheikh Akbar, NguyenTam Nguyen Truong and Sharad Suryavanshi, ” A facile greener approach of developing GO loaded Ag/AgCl/ZnO nanocomposites and their potentiality in Methyl Orange degradation “, submitted to Inorganics (2022).
  203. Yas Al-Hadeethi, A. Al-Mujtabi, Alaa Y. Mahmoud, Majid F Alotaibi, Ahmad Umar, Sheikh Akbar, ” Investigating the core parameters of a MA-P 1215 positive photoresist for high-resolution diffraction grating microelectronic fabrication”, submitted to Nanomaterials (2022).
  204. Yas Al-Hadeethi, A. Al-Mujtabi, Alaa Y. Mahmoud, Maged F Alotaibi, Ahmad Umar, Hassan Algadi, Sheikh Akbar, Sotirios Baskoutas and Mingguang Chen, “Fabrication of high-resolution silicon V-shape diffraction grating using MA-P 1215 positive photoresist: Investigating the core parameters”, submitted to Crystals (2022).
  205. Anjali Vijeata, Ganga Ram Chaudhary, Savita Chaudhary, Ahmad Umar, Sheikh Akbar, “Label free dual-mode sensing platform for trace level monitoring of ciprofloxacin using bio-derived carbon dots”, submitted to Environmental Research (2022).
  206. Rohit Goyat, Yajvinder Saharan, Joginder Singh, Ahmad Umar and Sheikh Akbar, “Graphene oxide/Metal oxide decorated polymeric hybrid membranes: Synthesis, characterization and its applications”, submitted to Molecules (2022).
  207. Digambar Nadargi, Ahmad Umar, Jyoti Nadargi, Mohseen S. Tamboli, Asiya M. Tamboli, Sheikh Akbar, Nguyen Tam Nguyen Truong, Sharad Suryavanshi, “A facile greener approach of developing GO loaded Ag/AgCl/ZnO nanocomposites and their potentiality in Methyl Orange degradation”, submitted to Inorganics (2022).
  208. Vikas Kumar; Chadetrik Rout; Joginder Singh; Yajvinder Saharan; Rohit Goyat; Ahmad Umar; Sheikh Akbar; M. Shaheer Akhtar and Sotirios Baskoutas, “Clean-up Technologies for Heavy Metal Ions Contaminated Soil Samples: A Review”, submitted to Journal of Environmental Chemical Engineering (2022).
  209. Yajvinder Saharan, Joginder Singh, Rohit Goyat, Ahmad Umar, Sheikh Akbar and Sotirios Baskoutas, “Progress and current challenges for cleanup technologies for oil-contaminated soil samples,” submitted to Physical and Applied Sciences section of Heliyon (2022).
  210. Sumit Malik; Joginder Singh; Yajvinder Saharan; Rohit Goyat; Vivek Chaudhry; Ahmad Umar; Sheikh Akbar; Sadia Ameen and Sotirios Baskoutas,” Nanomaterials-Based Biosensor and their Applications: A Review”, submitted to Microchimica Acta (2022).
  211. Manisha Kumari, Kirandeep Banger, Ganga Ram Chaudhary, Savita Chaudhary, Ahmad Umar and Sheikh Akbar, “Bio-waste derived Carbon dots for highly specific and sensitive detection of monosodium glutamate in food products” submitted to ACS Applied nano-materials (2023).
  212. Ahmad Umar, Rajesh Kumar, Ahmed A. Ibrahim, Hassan Algadi, Yao Wang, and Sheikh Akbar, “Polyethylene glycol embedded reduced graphene oxide supramolecular assemblies for enhanced room-temperature gas sensors,” in preparation (2023).
  213. K. Abd El-Rahman, Nuha Al-Harbi, Ahmad Umar and Sheikh Akbar, “Applications of Nanotechnology to the Components of Anode, Cathode and Proton Exchange Membrane Materials in Improving the Efficiency of Microbial Fuel Cells”, in preparation (2023).
  214. Rapinder Kaur, Rohit Goyat, Joginder Singh, Ahmad Umar, Vivek Chaudhry and Sheikh Akbar, “Membrane distillation: One of the perfect fighters for desalination”, in preparation (2023).
  215. Baoyu Huang, Xinwei Tong, Xiangpeng Zhang, Qiuxia Feng, Marina N. Rumyantseva, Jai Prakash, Xiaogan Li and Sheikh Akbar, “MXene/NiO composites for sensitive formaldehyde sensor at room temperature”, in preparation (2023).
  216. Ansari, Z. Niu, S. Dregia and S. Akbar, “Self-assembled nanoislands in the rare earth (RE)/yttria-stabilized zirconia (YSZ) system,” in preparation (2023).
  217. Conference Proceedings
  218. Sato, S.A. Akbar and G.E. Murch, “Tracer Diffusion in an Ordered Alloy: Application of the Path Probability and Monte Carlo Methods,” in Diffusion in Solids: Recent Developments, Eds., M.A. Dayananda and G.E. Murch, p. 67-95, TMS (1985).
  219. A. Akbar and H. Sato, “Atomic Transport under the Coexistence of Temperature and Oxygen Potential Gradients,” in Oxidation of Metals and Related Mass Transport, Eds., M.A. Dayananda, S.J. Rothman and W.E. King, p. 49-65, TMS (1987).
  220. A. Akbar, M.L. Chretien and J. Huang, “Rapidly Solidified Superconducting Film on Metallic Wire,” in Superconductivity and Applications, Eds., H.S. Kwok, Y. Kao and D.T. Shaw, pp. 719-725, Plenum, New York (1989).
  221. A. Akbar, M.S. Wong, M.J. Bothelo, Y. M. Sung, M. Alauddin, C. E. Drummer and M. J. Fair, “Effect of Doping in the Bi-Sr-Ca-Cu-O Superconductor,” Advances in Matls. Science and Applications of Superconductors, NASA Conf. Pub, 3100, 107-112 (1990).
  222. A. Chaudhury, S.A. Akbar and S.G. Mhaisalkar, “Superconductivity or Magnetism in the La-Ca-Co-O System?” J. Eng. Inst. (Bangladesh), 20[4], 41-43 (1992).
  223. A. Chaudhury and S. A. Akbar, “Antimony and Lead Doping in the Bi-Ca-Sr-Cu-O Superconductor,” J. Eng. Inst. (Bangladesh), 21[1], 35-38 (1993).
  224. C. Wang and S.A. Akbar, “Diffusion in Ordered Binary Alloys: A Microscopic Approach,” in Diffusion in Ordered Alloys, Eds., B. Fultz, R. Chan and D. Gupta, pp.3-20, TMS (1993).
  225. Alauddin, L. Vigdorchik, Z.A. Chaudhury, S.A. Akbar, W.D. Ehmann and B. Fa-ni, “Determination of Oxygen Contents of Bi1.9-xPbxSb0.1Sr2Ca2Cu3Oyby Iodometric Titration and Its Relevance to Superconducting Transition,” in Superconductivity and Its Applications, Eds. H.S. Kwok, D. Shaw and M. Naughton, pp. 350-355, AIP Proceedings 273, (1993).
  226. M. Azad, L. Younkman and S.A. Akbar, “Semiconducting oxides for Carbon Monoxide Detection,” Proceedings of the International Symposium on Field Screening Methods for Hazardous Wastes and Toxic Chemicals, vol.1, 94-104 (1993).
  227. A. Akbar, A.M. Azad and W.H. Chen, “High-Temperature Ceramic Sensors,” Conf. Proceedings, Sensors Expo 1994, pp. 225-233, Helmers Pub. Inc. & Expocon Management Assoc. (1994).
  228. M. Azad, L.B. Younkman, S.A. Akbar, A. Soliman and G. Rizzoni, “Performance of a Ceramic CO Sensor in the Automotive Exhaust System,” SAE Technical Paper 950478 (1995)
  229. A. Sebo, S.A. Akbar, J.R. Cedeno, E.P. Casale, S.S. Mehta and W. Tjokrodiponto, “Review of Fog Chamber Design and Test Techniques for Polymer Insulator Evaluation,” Proc. of 9th Int. Symp. on High Voltage Engineering, paper # 4562, pp. 1-4, Graz, Austria, August (1995).
  230. A. Sebo, E.P. Casale, J.R. Cedeno, W. Tjokrodiponto, S.A. Akbar, J.D. Sakich and T. Zhao, “Review of Features Fog Chamber at The Ohio State University for Polymer Insulator Evaluation,” Conf. Proceedings on Electrical Insulation and Dielectric Phenomena, San Francisco, CA, October 1996, pp. 443-446.
  231. M. Azad, L.B. Younkman, S.A. Akbar, S. Ahmed and G. Rizzoni, “Test Results of a Ceramic-Based Carbon Monoxide Sensor in the Automotive Exhaust Manifold,” in Role of Ceramics in Advanced Electrochemical Systems, Ceramic Transactions, vol. 65, Eds., P. Kumta, G. Rohrer and U. Balachandran, pp. 343-354 (1996).
  232. A. Akbar, C.C. Wang, L. Wang and D.J. Collins, “Ceramic Oxides as Potential Hydrocarbon and NOxSensors,” in Role of Ceramics in Advanced Electrochemical Systems, Ceramic Transactions, vol. 65, Eds., P. Kumta, G. Rohrer and U. Balachandran, pp. 331-342 (1996).
  233. A. Akbar, C.C. Wang and L. Wang, “Ceramic Materials May Revolutionize Automotive Emissions Control,” Ceramic Industry, 32-36, June (1996).
  234. A. Akbar, L.B. Younkman and P.K. Dutta, “Selectivity of an Anatase TiO2-Based Gas Sensor,” in Polymers in Sensors: Theory and Practice, Eds., N. Akmal and A.M. Usmani, ACS Symposium Series 690, pp. 161-167 (1997).
  235. Wang, S.A. Akbar, A. Soliman and G. Rizzoni, ” Ceramic Sensors for Automotive Exhaust Monitoring,” 30th ISATA Conf. Proceedings, paper # 97EN050, June 16-19, Florence, Italy (1997).
  236. J. Madou, Y. Zhang, C.C. Wang and S.A. Akbar, “MEMS Chemical Sensors for Automotive Applications,” SAE Proceedings Sensors Expo, Detroit, 329-335 (1997).
  237. A. Sebo, E.P. Casale, J.R. Cedeno, W. Tjokrodiponto, S.A. Akbar, J.D. Sakich and T. Zhao, “Polymer Insulator Test Procedures and Techniues Followed During Fog Chamber Test Series,” Conf. Proceedings, 5th International Conf. on Properties and Applications of Dielectric Materials, Seol, May 1997, pp. 734-737.
  238. A. Akbar, “High-Temperature Sensors for Harsh Industrial Applications: Challenges and Promise,” NSF SIUCRC Symposium Proceedings, pp. 5/1-5/11, Norman, Oklahoma, September 3-5, 1997.
  239. D. Hogg, S.A. Akbar, P.K. Dutta, A. Ginwalla, P. Gouma and Z. Liang, “Structure-Function Relationships for Inorganic Materials Used as Gas Sensors,” NSF SIUCRC Symposium Proceedings, pp. 5/12-5/13, Norman, Oklahoma, September 3-5, 1997.
  240. Wang, C.C. Wang, A. Soliman and S.A. Akbar, “Rugged and Reliable Sensors for Automotive Applications,” NSF SIUCRC Symposium Proceedings, pp. 5/14-5/16, Norman, Oklahoma, September 3-5, 1997.
  241. A. Sebo, W. Tjokrodiponto, J.R. Cedeno, E.P. Casale, S.A. Akbar, J.D. Sakich and T. Zhao, “Fog Chamber Tests of 35 kV Polymer Insulators: Review of Scope of Tests,” Proceedings of the 10th International Symposium on High Voltage Engineering (ISH’97), Montreal, Canada, August 1997.
  242. Kohli, W. Zhu, S.A. Akbar, S. Sebo and Zhao, “Characterization of Polymeric Housing Materials of Non-ceramic Insulators after Aging Tests,” Conf. Proceedings, 1998 IEEE International Symposium on Electrical Insulation, Arlington, VA, June 7-11 (1998).
  243. A. Akbar “Ceramic Sensors for Applications in Hostile Environment,” in Solid State Chemical and Biochemical Sensors, Proceedings of CIMTEC, a World Forum on New Materials, Florence, Italy (1998).
  244. A. Akbar, P.K. Dutta and M.J. Madou, “Novel Sensors R&D Leading to Curriculum Development,” Proceedings. of the International Conf. on Engineering Education, Rio de Janeiro, Brazil, CD-ROM Edition (1998).
  245. Du, N. Szabo, P.K. Dutta and S.A. Akbar, “High-Temperature Potentiometric Type NO Sensor,” NSF SIUCRC Symposium Proceedings, Cary, North Carolina, pp.117-119 (1998).
  246. Thamboon, S. Yao, P. Gouma and S.A. Akbar, “Solid Electrolyte Based NOx Sensors,”
    in Electrochemistry of Glass and Ceramics, Eds., S. K. Sundaram, Ceramic Transactions V. 92, p221, (1999).
  247. A. Akbar and C.C. Wang, “Ceramic sensors for applications in hostile environments,”   Advances in Science and Technology (Faenza, Italy), Solid State Chemical and Biochemical Sensors, 26,  3-14 (1999).
  248. A. Akbar and P.K. Dutta, “High-Temperature Ceramic Oxide Gas Sensors,” in Surface Engineering Science and Technology I, Eds. A. Kumar, Y. Chung, J. Moore and J. Smugeresky, pp. 33-44, TMS (1999).
  249. K.M.S. Chowdhury, S.A. Akbar and R.J. Schorr, “Concentration Cell Type Solid Reference Oxygen Sensors for Ceramic Kiln Monitoring,” in Chemical Sensors IV, proceedings of the Electrochemical Society meeting, Hawaii, vol. 99-23, pp. 1-20 (1999).
  250. A. Akbar, P.K. Dutta, Y. Wang, B.R. Patton and M.J. Madou, “Multidisciplinary Curriculum in Sensor Materials,” Proceedings of ICEE-99, August 10-14, Ostrava-Prague, Czech Republic, CD-ROM Edition (1999).
  251. A. Akbar, “Multidisciplinary Curriculum in Sensor Materials: A Research Spin-off,” NFB, vol.3, No. 367, Tuesday, September 28, 1999.
  252. M. Rahman, C.A. Edwards and S.A. Akbar, “Effluent Gases from Coal Combustion – Effect on Environment,” Social Science Research Network Electronic Journal (http://papers.ssrn.com/paper.taf; id=209488), 15 March (2000).
  253. A. Akbar, A. Rahman and A. Ahmed, “Ceramic Sensors for Industrial Applications: Opportunities and Challenges,” 7th Annual Conference Proceedings, Bangladesh Ceramic Society, pp. 12-15, March 6-8, Dhaka, Bangladesh (2000).
  254. A. Akbar and P.K. Dutta, “A Research Driven Multidisciplinary Curriculum in Sensor Materials,” ASEE Annual Conference Proc., June 18-21, St. Louis, MO, CD-ROM Edition (2000).
  255. A. Akbar, P.K. Dutta, Y. Wang, B.R. Patton and M.J. Madou, “A Multidisciplinary Curriculum Based on Team Work and Industrial Partnership,” Proceedings of ICEE-00, August 14-18, Taipei, Taiwan, CD-ROM Edition (2000).
  256. A. Akbar and P.K. Dutta, “Ceramic Sensors for Industrial Applications,” in Encyclopedia of Materials: Science and Technology, Elsevier, pp. 1080-1086 (2001).
  257. A. Akbar, P.K. Dutta and B.R. Patton, “Sensor Materials: A Multidisciplinary Approach,” Proceedings of ICEE-01, August 6-9, Oslo, Norway, CD-ROM Edition (2001).
  258. Noh, I. Bae, Y. Shin, J. Hong, W. Lee, K. Hong and S.A. Akbar, “Effects of NiO addition in WO3-based Gas Sensors Prepared by Thick Film Process,” SSI 2001 Conf. Proceedings, Cains, Australia, 2001.
  259. Merhaba, S.A. Akbar, S. Feng, G. Newaz, L. Riester and P. Blau “Durability of Thick-film Ceramic Sensors,” in Chemical Sensors for Hostile Environments, Ceramic Transactions, G.M. Kale, S.A. Akbar and M. Liu, Eds., vol. 130, pp. 37-45, ACerS (2002).
  260. V.G. Reddy, S.A. Akbar, C. Cao, O.K. Tan and W. Zhu, “Preparation and Characterization of Iron Oxide-Zirconia Nano Powder for its use as an Ethanol Sensor Material,” in Chemical Sensors for Hostile Environments, Ceramic Transactions, G.M. Kale, S.A. Akbar, and M. Liu, Eds., vol. 130, pp. 67-78, ACerS (2002).
  261. Feng, A. Merhaba, G. Newaz, G. Auner and S. Akbar, “Evaluation of Durability and Bonding Characteristics of TiO2-Al2O3 Gas Sensor,” Nondestructive Evaluation of Micro and Nanomaterial Systems, 7th Annual SPIE Proceedings vol. 4703, 31-36, Ed. N. Meyendorf, (2002).
  262. Lee, S.A. Akbar and C.O. Park, “Potentiometric CO2 gas sensor with lithium ion electrolyte,” in Processing and Fabrication of Advanced Materials XI [Proceedings of the International Symposium on Processing and Fabrication of Advanced Materials], Columbus, OH, US, Oct. 7-10, 2002,  pp.63-77 (2003).
  263. Lee, S.A. Akbar and C.O. Park,  “Potentiometric CO2 gas sensor with lithium ion conducting electrolytes,”in Advances in Science and Technology (Faenza, Italy),  33 (10th International Ceramics Congress, 2002, Part D),  pp. 3-14 (2003).
  264. A. Akbar, “Ceramic sensors for the glass industry,” Proceedings of the 63rd Conference on Glass Problems, CESP, vol.24, issue 1, 91-100 (2003).
  265. A. Akbar and C.O. Park, “Guest Editorial: Chemical Sensors for Pollution Monitoring and Control,” J. Matls. Sci., 38, 4237 (2003).
  266. A. Akbar and C.O. Park, “Guest Editorial: Chemical and Bio-ceramics,” J. Matls. Sci., 38, 4609-4610 (2003).
  267. Akbar and S. Yoo, “Ceramic Nano-structures for Chemical Sensing,” Chemical Sensors, 20 (suppl. B), 30-31 (2004).
  268. M. Azad and S.A. Akbar, “Evolution of Exotic Microstructures in Metal Oxide Semiconducting (MOS) Ceramics via Gas Phase Reconstitution,” SPIE Conf. Proceedings vol. 5998, 1-15 (2005).
  269. Lee, N. Szabo, P.K. Dutta and S.A. Akbar, “Solid-State Electrochemical Sensors: Opportunities and Challenges,” Encyclopedia of Sensors, Eds, C.A. Grimes, E.C. Dickey and M.V. Pishko, vol. 10, pp. 1-20, American Scientific Publishers (2006).
  270. S. Lima, B. R. Marple, H. Lee, S. A. Akbar, “Fabrication of Nanostructured TiO2 Fibers on TiO2 Coatings Produced from a Nanostructured Feedstock,” Proceedings of the International Thermal Spray Conference, Seattle, WA, May 15-18 (2006), S816/1-S816/4 (2006).
  271. M. Carney, S.A. Akbar, “Nano-structured ceramics by gas-phase reaction,” ECS Transactions, 3(9), Nanostructured Metal Oxides, 107-113 (2006).
  272. A. Akbar, “Nano-structured Oxides: Platforms for Chemical Sensing and Beyond,” AIP Conference Proceedings, vol. 1362, 139-141 (2011).
  273. A. Akbar, “Nano-structured Oxides: A Materials Approach,” AIP Conference Proceedings, vol. 1370, 54-60 (2011).
  274. A. Akbar, “Ceramic Gas Sensors to Nano-structures,” ECS Transactions, 50(12), 119-128 (2013).
  275. W. Tan, B. Pingguan-Murphy, R. Ahmad and S.A. Akbar, “Surface Properties and Cell Response of Bioactive Thermally Grown TiO2 Nanofibers,” Applied Mechanics and Materials, vol. 575, pp. 219-222 (2014).
  276. W. Tan, B.P. Murphy, R. Ahmad and S.A. Akbar, “Synthesis of bioactive titania nanofibrous structures via oxidation,” Materials Research Innovations, Volume 18, Issue S6, pp. S6-220-S6-223 (December 8, 2014).
  277. W. Tan, B. Pingguan-Murphy, R. Ahmad, S. Akbar, “Evaluation of Surface Properties andIn Vitro Characterization of Surface Modified In SituTiO2 Nanofibers”, Key Engineering Materials, Vols. 656-657, pp. 63-67, June (2015).

Patents:

  1. A. Akbar, A.M. Azad and L.B. Younkman, “Solid-State Sensors for Carbon Monoxide and Hydrogen,” US patent # 5,439,580, August 8, 1995.
  2. A. Akbar and W. Chen, V.D. Patton and C.C. Wang, “High-Temperature Thermistor Device and Method,” US patent # 5,681,111, October 28, 1997.
  3. Szabo, P.K. Dutta, H. Duh and S. A. Akbar, “Potentiometric NOx Sensors Based on Yttria-Stabilized Zirconia with Zeolite-Modified Electrode,” US patent # 6,843,900 B2, January 18, 2005.
  4. A. Akbar, S. Yoo and K.H. Sandhage, “Method of forming nanostructures on ceramics,” US patent # 7,303,723, December 4, 2007.
  5. Ramamoorthy, P.K. Dutta and S.A. Akbar, “A robust high temperature semiconducting CO sensor,” US patent # 2008/209982 A1, September 4, 2008.
  6. Xiaogan Li, P.K. Dutta and S.A. Akbar, “Robust High Temperature Composite and CO Sensor Made from Such Composite,” US patent # 7,649,547, April 13, 2010.
  7. Routbort, Jules L.; Singh, Dileep; Dutta, Prabir K.; Ramasamy, Ramamoorthy; Spirig, John V.; Akbar, Sheikh. “High-temperature potentiometric oxygen sensor with internal reference,” US patent # 8,057,652, November 15, 2011.
  8. Lee, S.A. Akbar and P.K. Dutta, “Humidity interference-free high temperature CO2 sensor,” US patent # 8,057,653, November 15, 2011.

International Reviewer of Ph.D. Theses

  1. “Computer Simulation of Diffusion in Binary Systems,” L. Zhang, University of Newcastle, N. S. W., Australia (1991).
  2. “Computer Simulation of Correlation Effects in Solid State Diffusion,” Z. Qin, University of Newcastle, N. S. W., Australia (1993).
  3. “Characteristics and Modeling of High-Temperature Combustible Gas Sensors,” Tan Yi, National University of Singapore (NUS), Singapore (1995).
  4. “Studies of ZnO-Based Thick Film Resistors for Gas Sensor Applications,”

J.D. Nutakki, University of Pune, Pune, India (1998).

  1. “Ferroelectric Thin Films Using RF Sputtering and Sol-gel Technology for Electronic Devices”, Chen Xiaofeng, Nanyang Technological University NTU), Singapore (2000).
  2. “Evaluation of Yttrium-Doped SrTiO3 as a Solid Oxide Fuel Cell Anode”, Shiqiang Hui, McMaster University, Canada (2000).
  3. “Semiconductor Oxide Based Gas Sensors,” Cao Wenqing, Nanyang Technological University, Singapore (2002).
  4. “Effect of Cu Addition on Gas Sensing Properties of Metal Oxides and Related Material Characterizations,” P. S. More, University of Pune, Pune, India (2004).
  5. “Deposition and Characterization of High-K Dielectric Thin Films Using Sol-gel Technology for Electronic Devices,” Yu Ting, Nanyang Technological University, Singapore (2004).
  6. “Design and Fabrication of a New Ultrasonic Device and its Application for Drug Delivery,” Nanyang Technological University, Singapore (2005).
  7. “Nano-sized Strontium Titanate Metal Oxide Semiconductor Oxygen Gas Sensors,” HuYing, Nanyang Technological University, Singapore (2005).
  8. “Piezoelectric Films Using Hybrid Technology for Ultrasonic Array and Electronic Device Applications,” Chao Chen, Nanyang Technological University, Singapore (2005).
  9. “Synthesis and Characterization of FePt Nanoparticles in Water-in-oil Microemulsions,” Ms. Koay Mei Hyie, University of Malaya, Malaysia (2009).
  10. “Enhanced grain boundary conduction in Gd-doped ceria by the addition of alkali earth oxides,” Pyeong-Seok Cho, Korea University, Seoul, Korea (2009).
  11. “Synthesis and Characterization of Metal Oxide (SnO2, SnO2-WOx), Metal (Ag, Au, CuSi) and Bimetallic (Ag-Au core shell) Nanoparticles and Their Gas Sensing Application,” Ms. Prajakta kanitkar, University of Pune, India (2011).
  12. “Fabrication and Characterization ofPolypyrol, ZnO and Their Composite Based Gas Sensors for Oxidizing and Reducing Gases,” Joshi Chandrakant, University of Pune, India (2011).
  13. “Synthesis and Characterization of Maghemite Nanoparticles Dispersed Within Silica Matrix,” Ang Bee Chin, University of Malaya, Malaysia (2011).
  14. “Gas Sensors Using Oxide Hollow Spheres Prepared by Poly-saccharide Mediated Hydrothermal Reaction,” Sun-Jung Kim, Korea University, Seoul, Korea (2011).
  15. “Nanostructured composite photoanode for dye-sensitized solar cell,” Chiew Keat Lim, Nanyang Technological University, Singapore (2012).
  16. “Synthesis and Characterization of Electrodeposited Nanocrystalline Ferromagnetic Cobalt-iron-platinum Alloy Films,” Teh Seoh Hian, University of Malaya (2013).
  17. “Study of Nanaostructured Semiconductor Metal Oxide as Visible-Light Photocatalyst,” Pei Yun Tan, Nanyang Technological University, Singapore (2013).
  18. “Solvent-dependant growth and size prediction of 1D single crystalline β-FeOOH nanorods,” Mahbubur Rahman Chowdhury, Cape Peninsula University of Technology, South Africa (2013).
  19. “BiVO4-based Nanoparticles for Visible-Light Photocatalytic Applications,” Han Mandi, Nanyang Technological University, Singapore (2013).
  20. “Development of Calcium Silicate Composite for Bone Tissue Engineering,” Mehdi Mehrali, University of Malaya, Kuala Lumpur, Malaysia (2014).
  21. “Nanostructured Metal Oxide Thin Film Based Sensors for Detecting Methane, Ammonia and Hydrogen,” P. Dhivya of SASTRA University, Tamul Nadu, India (2015)..
  22. “Gas sensing characteristic of zinc oxide-copper oxide hetero-composite thin films, Abhishek Ghosh, Indian Institute of Technology, Kharagpur, India (2017).
  23. “Mechanistic Investigation and Rational Design of Heterogeneous Catalysts for CO2 Conversion and Energy Storage,” Si-Won Kim, Korea University, Seoul, Korea (2018).
  24. “Highly Selective and Sensitive Xylene Gas Sensor Using Doped and Multinary p-type Oxide Semiconductor,” Bo-Young Kim, Korea University, Seoul, Korea (2019).
  25. “Visible-Light Driven Photo-activity Study: m-BiVO4 based Nano-particles and Thin Film,” Luo Qiong, Nanyang Technological University, Singapore (2020).
  26. “Synthesis zinc oxide-cellulose nanocomposite for application as ultraviolet sensor,” Karunakar Sahoo, Indian Institute of Technology (Indian School of Mines) Dhanbad (2021).
  27. “STUDIES ON THE PHASE TRANSITION AND ELECTRICAL PROPERTIES OF RARE-EARTH (Sm, Nd) MODIFIED BARIUMZIRCONIUM TITANATE DIELECTRIC CERAMICS” by Mohd Fahad, Indian Institute of Technology, Dhanbad, Jharkand, India (2022).

Selected Invited Presentations

  1. A. Akbar, “An Atomistic Treatment of Demixing in Multicomponent Oxides,” NATO ASI Conference on Diffusion in Materials, Aussois, France (1989).
  2. A. Akbar, A.M. Azad and W.H. Chen, “High-Temperature Ceramic Sensors,” Sensor Expo94, Cleveland, OH, September 20-22 (1994).
  3. A. Akbar, “Smart Ceramics,” workshop and training program on Ceramic Technology in Bangladesh organized by the Institute of Chemists and Chemical Technologists, Dhaka, Bangladesh, July 13 (1995)
  4. A. Akbar, “Smart Materials and Ceramic Sensors,” Central Ohio Technology Expo. and Conf., Columbus, OH, Feb. 22 (1996).
  5. A. Akbar, Ceramic Sensors for Hostile Environments: Tests in Automotive Engines,” 47th Earthmoving Industry Conf. & Expo., Peoria, IL, April 16-17 (1996).
  6. A. Akbar, L. Wang and C.C. Wang, “Ceramic Sensors for Automotive Exhaust Gas Monitoring,” 189th Meeting of Electrochem. Soc., Los Angeles, CA, May 5-10 (1996).
  7. A. Akbar, “High-Temperature Ceramic Sensors,” Symposium on Chemistry & Tech. Of Chemical Sensors and Biosensors, Amer. Chem. Soc., Orlando, FL, Aug. 25-30 (1996).
  8. A. Akbar, “Sensor Materials for High-Temperature Applications,” 10th Annual Alabama Materials Conference, Auburn University, Auburn, AL, September (1996).
  9. A. Akbar, “Ceramic Sensors for Hostile Environments,” International Conf. SENSOR-97, Kharagpur, India, December 30, 1997.
  10. A. Akbar, “Ceramic Sensors,” colloquium speaker, Case Western Reserve University, Cleveland, OH, Feb. 10, 1998.
  11. A. Akbar, “High Temperature Sensors,” colloquium speaker, Purdue University, West Lafayette, IN, March 2, 1998.
  12. A. Akbar, “Ceramic Sensors for Hostile Environment,” American Chemical Society Mtg. Cleveland, OH, May 24-28, 1998.
  13. A. Akbar, “CISM and Cearmic Sensors for Industrial Applications,” CIMTEC, Florence, Italy, June 14 – 19, 1998.
  14. A. Akbar, “Ceramic Sensors for Hostile Environments,” CNR-LAMEL, Bologna, Italy, June 15, 1998.
  15. A. Akbar, “Interdisciplinary Program in Sensors and Measurements,” Intl. Conf. Engineering Education, August 17-20, Rio de Janeiro, Brazil, 1998.
  16. K. Dutta and S.A. Akbar, “High-Temperature Ceramic Oxide Gas Sensors: Chemistry at the Gas-Solid Interface”, 50th PCRM and ACerS Basic Science Fall Meeting, Irvine, CA, October 21-24, 1998.
  17. Zhu, S.A. Akbar, R. Asiaie and P.K. Dutta, “Synthesis, Microstructure and Electrical Properties of Hydrothermally Prepared Ferroelectric BaTiO3 Thin Films,” 2nd Asian Meeting on Ferroelectrics (AMF-2), Singapore, December 8-11, 1998.
  18. A. Akbar, “Multidisciplinary R&D in Sensor Materials and Devices,” Special Seminar, Nanyang Technological University, Singapore, December 10, 1998.
  19. A. Akbar, “Sensor Materials R&D and Innovative Curriculum Development,” Colloquium Speaker, Wayne State University, Detroit, MI, February 2, 1999.
  20. A. Akbar and P.K. Dutta, “Ceramic Gas Sensors: Chemistry at the Gas-Solid Interface,” TMS Annual Meeting, San Diego, CA, Feb. 28 – March 3, 1999.
  21. A. Akbar, “Ceramic Sensors R&D Leading to a Novel Curriculum Development,” 1999 Outstanding Materials Engineer Award Talk, Purdue University, April 19, 1999.
  22. A. Akbar, “Ceramic Gas Sensors: Opportunities and Challenges,” Michigan Vacuum Society Annual Meeting, Detroit, May 19, 1999.
  23. A. Akbar et al., “Multidisciplinary Curriculum in Sensor Materials,” ICEE-99, Prague, Czech Republic (1999).
  24. A. Akbar et al., “Solid Reference Oxygen Sensors for Ceramic Kiln,” Electrochemical Society Meeting, Hawaii (1999).
  25. A. Akbar, “A New Curriculum Developed by Team-work, Multidisciplinary and Industrial Partnership,” Suzuka National College of Engineering, Suzuka, Japan (1999).
  26. A. Akbar, “Ceramic Sensors: Opportunities and Challenges,” Gordon Conference on Chemical Sensors and Interfacial Design, Ventura Beach, California, Jan. 23-28, 2000.
  27. A. Akbar, “Hostile Environment Sensors,” colloquium speaker, University of Cincinnati, Cicinnati, OH, February 18, 2000.
  28. A. Akbar, P.K. Dutta, Y. Wang, B.R. Patton and M.J. Madou, “Multidisciplinary Curriculum in Sensor Materials,” TMS Annual Meeting, Nashville, TN, March 12-15, 2000.
  29. A. Akbar, Ceramic Sensors for Industrial Applications: Opportunities and Challenges,” Plenary Lecture, 7th Annual Conference, Bangladesh Ceramic Society, Dhaka, Bangladesh, April 6-8, 2000.
  30. A. Akbar and P.K. Dutta, “A Research Driven Multidisciplinary Program in Sensor Materials and Devices,” ASEE Annual Conference, St. Louis, MO, June 18-21, 2000.
  31. A. Akbar, P.K. Dutta, Y. Wang, B.R. Patton and M.J. Madou, “A Multidisciplinary Curriculum Based on Team-work and Industrial Partnership”, ICEE-2000, Taipei, Taiwan, August 12-18, 2000.
  32. A. Akbar, “Ceramic Sensors for Industrial Pollution Monitoring and Control,” International Symposium on Development and Applications of Environmental Sensor Materials, Masan, Korea, November 7, 2000.
  33. A. Akbar, “Ceramic Sensors: Opportunities and Challenges,” Taejon University, Taejon, Korea, November 8, 2000.
  34. A. Akbar, “Ceramic Sensors R&D Leading to a One-of-a-kind Curriculum Development,” for Industrial Pollution Monitoring and Control,” KAIST, Korea, November 9, 2000.
  35. A. Akbar, “Ceramic Sensor for Industrial Applications: Opportunities and Challenges,” Fulrath Symposium, American Ceramic Society Annual Meeting, April 22-26, Indianapolis, IN, USA, 2001.
  36. A. Akbar, “Ceramic Sensors: an Overview,” International Conference-ICMAT 2001, Singapore, July 1-6, 2001.
  37. A. Akbar, P.K. Dutta, B.R. Patton and Y. Wang, “Sensor Curriculum Based on Team-work and Industrial Experience,” ICEE-2001, Norway, August 6-10, 2001.
  38. A. Akbar, “Multidisciplinary Research and Education in Ceramic Sensors,” King Fahd University of Minerals and Petroleum, Dhahran, Saudi Arabia, February, 2002.
  39. A. Akbar, “R&D in Sensors Leading to Curriculum Development,” Ceramic Society of Japan Annual Meeting, Osaka, Japan, March (2002).
  40. A. Akbar, “Nano-ceramics and Chemical Sensing,” Science & Technology Center, Taegu, Korea, March (2002).
  41. A. Akbar, “Multidisciplinary Research Leading to an Innovative Curriculum,” American Ceramic Society Annual Meeting, St. Lois, MO, April (2002).
  42. A. Akbar, “Ceramic Oxides and Nano-structures for Chemical Sensing and Catalysis,” Nayang Technological University, Singapore, July 22, 2002.
  43. A. Akbar, “Research Driven Multidisciplinary Curriculum is Sensors,” Nanyang Technological University, Singapore, August 19, 2002.
  44. A. Akbar, “Sensors in the Glass Industry,” 63rd Conference on Glass Problems, Columbus, OH, October 22 and 23, 2002.
  45. A. Akbar, “Nano-structured Ceramics for Chemical Sensing and Catalysis,” American Ceramic Society Meeting, Cocoa Beach, FL, January 26-30, 2003.
  46. A. Akbar, “Chemically Active Ceramics: Sensing and Catalysis,” King Fahd University of Minerals and Petroleum, Dhahran, Saudi Arabia, June, 2003.
  47. A. Akbar and P.K. Dutta, “Ceramics for Chemical Sensing,” C.B. Alcock Symposium, Electrochemical Society Meeting, Orlando, FL, October 12-16, 2003.
  48. A. Akbar, “Nano-ceramics through gas phase reaction,” International Conference on Materials for Advanced Technologies (ICMAT-2003), Singapore, December 8-12, 2003.
  49. A. Akbar and C. Lee, “Electrochemical CO2 Sensors: Opportunities and Challenges,” American Ceramic Society Meeting, Cocoa Beach, FL, January 26-30, 2004.
  50. A. Akbar, “From Bulk and Thick-film Sensors to Titania Nano-fingers,” CMR, OSU, February 2004.
  51. A. Akbar, “From Bulk and Thick-film Sensors to Ceramic Nano-structures,” Keynote Speaker, ASM/TMS Symposium on Smart and Functional Materials, GE Global Research, May 24-25, 2004.
  52. A. Akbar, S. Yoo and C. Carney, “Nano-ceramics for Chemical Sensing,” 10th International Meeting on Chemical Sensors, Tsukuba, Japan, July 11-14 (2004).
  53. A. Akbar, “Nano-ceramics and nano-structres,” Chosun University, Kwangju, Korea, July 22, 2004.
  54. A. Akbar, “Ceramic nano-structures: a platform for Chemical Sensing,” KITECH, Chonan, Korea, July 26, 2004.
  55. A. Akbar, “Sensor Arrays and Modeling,” Kyungpook National University, Taegu, Korea, July 28, 2004.
  56. A. Akbar, “Ceramic Sensors Leading to Ceramic Nano-structures,” TMS Fall Meeting, Columbus, October 2004.
  57. A. Akbar, Series of Lectures on Ceramic Materials and Nano-structures for Chemical Sensing and Catalysis, Visiting Professor, Korea Advanced Institute Science and Technology (KAIST), Taejon, Korea, July 15-30, 2004
  58. A. Akbar, Workshop on Ceramic Materials and Nano-structures for Chemical Sensing and Catalysis, Visiting Professor, King Fahd University of Minerals and Petroleum, Dhahran, Saudi Arabia, December 18-23, 2004.
  59. A. Akbar. S. Yoo and C. Carney, “Ceramic Nano-structures: Platform for Sensing,” Cocoa Beach Meeting, Florida, January 23-28, 2005.
  60. A. Akbar, “Chemical Sensor Technologies,” US-Japan Bilateral Conference Sensor Systems for 21st Century, Tsukuba, Japan, Feb 28 – March 3, 2005.
  61. A. Akbar, “Ceramic Nano-structures; Platforms for Chemical Sensing and Catalysis,” Colloquium Speaker, Washington State University, Pullman, Washington, March 10, 2005.
  62. A. Akbar, “Nano-carving of Ceramics via Gas Phase Reaction,” AMEC-4, Hangzhou, China (2005).
  63. A. Akbar, “Gas-phase driven ceramic nano-structures: mechanism and applications,” Jiao Tong University, Shanghai, China (2006).
  64. A. Akbar, Lecture series on “Ceramic Materials and Nano-structures for Chemical Sensing and Catalysis”, Harbin Institute of Technology, Harbin, China (2006).
  65. A. Akbar and H. Lee “TiO2 thin-films for chemical sensing,” IMCS-11, Italy (2006).
  66. A. Akbar, Workshop on Nano-technology, Visiting Professor, King Fahd University of Minerals and Petroleum, Dhahran, Saudi Arabia, December 10-20, 2006.
  67. A. Akbar, “Nanofication of Ceramic Surfaces by Gas-phase Reaction,” ICMAT-07, Singapore, July 1-6, 2007.
  68. A. Akbar, “Ceramic Nano-structures: Platform for Sensing,” University of Malaya, Malaysia, July 13, 2007.
  69. A. Akbar, “Ceramic Nano-structures without lithography,” Korea University, Korea, July 25, 2007.
  70. A. Akbar, “Ceramic Nano-structures without lithography: platforms for chemical sensing,” EACCS-07, Singapore, December 3-5, 2007.
  71. A. Akbar, “Ceramic Nano-structures by surface modification: platforms for chemical sensing,” Symposium on sensor materials and technologies for safe and secure society, Tokyo, Japan, Keynote, March 11-13, 2008.
  72. A. Akbar, “Ceramic nano-structures by gas-phase reaction: processing, characterization and mechanism,” International Symposium on Functional Materials (ISFM2009), Plenary, Jinju, Korea, June 15-18, 2009.
  73. A. Akbar, “One dimensional nanostructures of oxides,” KAIST, Daejon, Korea (2009).
  74. A. Akbar, “Non-lithographic routes for ceramic nano-structures,” KITECH, Korea (2009).
  75. A. Akbar, “Oxide nano-structures for sensing and biomedical applications,” Chosun University, Gwangju, Korea (2009).
  76. A. Akbar, “Chemically Active Ceramics and Nano-structures,” Chonnam National University, Gwangju, Korea (2009)
  77. A. Akbar, “Nano-structured oxides for Novel Applications,” University of Western Australia, Perth, Australia (2010)
  78. A. Akbar, “Ceramic Oxides and Nano-structures,” University of Wollongong, Australia (2010)
  79. A. Akbar, “Novel Nano-structured Oxides by Surface Modification and Their Applications,” 5th Annual Meeting of the Saudi Physical Society, Abha, KSA, Keynote, October (2010)
  80. A. Akbar, “Poor Man’s Nanotechnology: A Materials Approach,” University of Malaya, Kuala Lumpur, Malaysia (2010)
  81. A. Akbar, “Nano-structured Oxides by Surface Modification: Platforms for Chemical Sensing and Beyond,” ISOEN 2011, Rockefeller Center, New York City, USA (2011).
  82. A. Akbar, “Nano-technology by Materials Design,” University of Malaya, Kuala Lumpur, Malaysia (2011)
  83. A. Akbar, “How to Write a Technical Paper?” University of Malaya, Kuala Lumpur, Malaysia (2011)
  84. A. Akbar, “Nano-structures for Chemical Sensing,” Chonnam National University, Gwangju, Korea (2011)
  85. A. Akbar, “Nano-structured Oxide Platforms for Chemical Sensing and Beyond: a Materials Design,” Korea University, Seoul, Korea (2011)
  86. A. Akbar, “Ceramic Nano-structures and Chemical Sensors,” Dalian University of Technology, Dalian, China (2011)
  87. A. Akbar, “Ceramic-based CO2 Sensor and Oxide Nano-structures,” Saudi Aramco,       Dhahran, Saudi Arabia (2011).
  88. A. Akbar, “Nano-structured Oxide Platforms: a Materials Design,” Nanyang       Technological University (NTU), Singapore (2012)
  89. A. Akbar, “From Ceramic Sensors to Oxide Nano-structures,” ECS Sensor Division       Outstanding Achievement Award presentation, Honolulu, HI, October (2012).
  90. A. Akbar, “Nano-structures by Materials Design: Platforms for Chemical Sensing and            Beyond,” keynote speaker at a workshop at University of Malaya, July 17 & 18, 2013,   Kuala Lumpur, Malaysia (2013).
  91. A. Akbar, “Nano-structured Oxide Platforms for Chemical Sensing and Beyond: A       Materials Design,” NANOSMAT 2014 USA, May 19-22, Houston, TX (2014).
  92. A. Akbar, “Nano-materials and Nano-structures: Opportunities and Challenges,” UM,           Kuala Lumpur, Malaysia, June 26, 2014.
  93. A. Akbar, “Materials Design of Nano-structured Oxides: Platforms for Chemical       Sensing and Biomedical Applications,” UM, Kuala Lumpur, Malaysia, June 27, 2014.
  94. A. Akbar, “Nano-structured Ceramics: Platforms for Chemical Sensing and Biomedical            Applications,” UKM, Bangi, Malaysia, July 3, 2014.
  95. A. Akbar, “Mentoring Post-graduate Students: Research Design and Fundamental       Basis,” UM, Kuala Lumpur, Malaysia, July 14, 2014.
  96. A. Akbar, “Ceramic Gas Sensors to Oxide Nano-heterostructures: A Materials Design,”    IMCS 2016, Jeju, Korea (2016).
  97. A. Akbar, “Ceramic Gas Sensors to Oxide Nano-heterostructures: A Materials Design,”    NANO CERAMICS 2016, Korea (2016).
  98. A. Akbar and Derek R. Miller, “Ceramic Gas Sensors to Oxide Nano-heterostructures,” ICACC, Daytona Beach, FL, USA (2017).
  99. A. Akbar, “Nano-structures by Surface Patterning: a Materials Design,” Dalian       University of Technology, Dalian, China (2017).
  100. A. Akbar, et al., “Nano-heterostructure sensors: opportunities and challenges,” IMCS 2018, Vienna, Austria (2018).
  101. A. Akbar, “Ceramic Nano-heterostructures: a Materials Design – Platform for sensing, catalysis and biomedical applications,” West Virginia University (2019).
  102. A. Akbar, “Oxide Nano-heterostructures: Platform for sensing and biomedical applications,” SERI, UKM, Kula Lumpur, Malaysia (November, 2020).
  103. A. Akbar, “Ceramic Nano-heterostructures: Platform for sensing and biomedical applications,” Invited Talk, International e-Conference on Physics – 2021

(February 5-7, 2021).

  1. A. Akbar, “Nano-heterostructured oxide surfaces by materials design – platforms for sensing and biomedical applications,” Keynote Talk, Faculty of Engineering and Built       Environment, UKM, Kula Lumpur, Malaysia (April 12, 2021).
  2. A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing and Biomedical Applications,” Keynote Speaker, NANOSYM2021, Nanotechnology    Malaysia Annual Symposium October 12, 2021.
  3. A. Akbar, “Ceramic Nano-heterostructures: Platform for sensing and biomedical applications,” Invited Talk, PACRIM 14, Vancouver, Canada, December 12-14, 2021.
  4. A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications – Opportunities and Challenges,” Ningbo Materials Conference (2022).
  5. A. Akbar, S.A. Akbar, “Nano-heterostructured oxide surfaces by materials design –

platforms for sensing and biomedical applications,” Invited Talk, 242 ECS Meeting,

May 29 – June3, 2022.

  1. S.A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications – Opportunities and Challenges,” MITAB (2022).
  2. S.A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications – Opportunities and Challenges,” Materials Summit, August 15, 2022.
  3. S.A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications – Opportunities and Challenges,” Alighar Conference on Nanotechnology,         October 1, 2022.
  4. S.A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications – Opportunities and Challenges,” BUET, Dhaka, Bangladesh, December 13,     2022.
  5. S.A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications – Opportunities and Challenges,”1st International Conference on Physics            Horizons and Multidisciplinary Siences-2023 (ICPHMS-2023), Pakistan (2023).
  6. S.A. Akbar, “Ceramic Nano-heterostructures by Materials Design: Platforms for Sensing           Applications,” 15th National Gas Sensors Conference, Nigbo, China (2023).

Current Research Group

Patricia Loughney

(co-advised with Vicky Doan-Nguyen Trigg)

PhD Chemical synthesis of polymer-derived ceramics
Jeniffa Rajavedhanayagam PhD Synthesis and characterization of oxidizers
Nathan Hughes Undergrad researcher Setting up sensor testing setup
Calder Lenhart Undergrad researcher Hydrothermal synthesis of nano-structured oxides
Luke Ciccone M.S. Next generation high-temperature electrodes for sensing devices

Students Graduated

Name Degree Year Thesis Title
1. S. G. Mhaisalkar Ph.D. 1990 Dielectric Properties and Characterization of Doped-BaTi4O9
2. J. S. Subramanian M.S. 1990 Preparation and Properties of Two-Phase Mixed Conductors of b-Alumina and Iron Oxide
3. Ching C. Wang Ph.D. 1993 Degradation of Multicomponent Oxides Under Oxygen Potential Gradients
4. Virginia Patton M.S. 1994 Yttria as a Potential High-Temperature Thermistor Material
5. Lora Younkman Ph.D. 1995 Development and Characterization of

Ceramic-Based Carbon Monoxide Sensors

6. AKM Rahman M.S. 1995 Potential Electrode/Lead Wire Materials and

Associated Joining for High-Temperature Thermistor

7. Weidong Zhu Ph.D. 1995 Characterization of Chemically Synthesized BaTiO3 in the Forms: Powder, Bulk and Thin Film Ceramics
8. Sylvain LaRose Ph.D. 1996 Synthesis and Characterization of Bi2Al4O9
9. Masataka Yahagi Ph.D. 1996 Infrared Sensors Based on PbO-doped PZT Ceramics
10. Chris Holt M.S. 1997 High-Temperature Thermistors for Aerospace Applications
11. Yuh-min Chiang M.S. 1997 Development of Hydrocarbon Sensors
12. Bala Lakshmi M.S. 1997 Characterization of Sensor Materials by TSC
13. Liming Wang Ph.D. 1998 Gas Sensors for Automotive Applications
14. Aseem Kohli M.S. 1998 Development of O2 Sensors for Ceramic Kilns
15. P. Thamboon M.S. 1998 Solid Electrolyte Based NOx Sensors
16. Surya Bulusu M.S. 1998 Insulation Materials and Lead Wire Attachment Methods for High temperature Thermistors
17. Srabani Banerjee M.S. 1998 Plan A (non-thesis)
18. Liang Zheng M.S. 1998 Plan A (non-thesis)
19. Ayan Banerjee M.S. 1999 Aging Behavior and Lead Wire Attachment Methods for Yttria-based High Temperature Thermistors
20. Badri Narayanan M.S. 2000 A Novel High Temperature Hydrocarbon Gas Sensor Based on a Proton Conducting Solid Electrolyte
21 Chong-Hoon Lee

 

M.S. 2000 Potentiometric Type CO2 Gas Sensor with Lithium Phosphorous Oxynitride Electrolyte
22. Yumin Lu M.S. 2001 Centrifugal Microfluidic Device and Sharp Electrode Array Based on Novel Hybrid Fabrication Methods
23. John Florkey

 

M.S. 2001 Fabrication and Characterization of Suspended Transmission Lines
24. Kunal Vaed M.S. 2001 Fabrication of Miniaturized Ceramic Structures
25. S. Kapileshwar M.S. 2001 Oxygen Sensor for Ceramic Kiln Monitoring
26. Adnan Merhaba M.S. 2001 Adhesion and Durability Related Issues in Planar Ceramic Gas Sensors
27. Amit Singh

 

M.S. 2001 Characterization of Carbon Derived from Pyrolysis of Photoresists
28. Samuel Shian

(with K. Sandhage)

M.S. 2003 The Preparation of Near-net-shaped MgCr2O4-TiO2

Ceramics via Displacement Reaction Processing and Associated Humidity Sensing Properties

29. Mohammad Hadi

(with Prof. Roblin)

M.S. 2004 Fabrication of LTCC Based RF Module for the Measurement of Dielectric Properties of Thin Layer Substrates
30. Chong-hoon Lee Ph.D. 2004 Study of Reversible Electrode Reaction and Mixed Ionic & Electronic Conduction of Lithium Phosphate Electrolyte for an Electrochemical CO2 Gas Sensor
31. Sehoon Yoo Ph.D. 2005 Oriented Arrays of Single Crystal TiO2 Nanofibers by Gas-phase Etching: Processing & Characterization
32. Carmen Carney Ph.D. 2006 Nano-structures by Gas-phase Reaction: Growth and Applications
33. Michael Rauscher Ph.D. 2007 Self-Assembly of Pseudo-Periodic Arrays of Nano-islands on YSZ-(001)
34. Inhee Lee Ph.D. 2008 Li-Electrolyte Based CO2 Sensors for a Wide Temperature Range
35. Huyong Lee

(with Dregia)

Ph.D. 2009 1-D TiO2 nano-fibers on Ti and Ti alloys by

oxidation under limited supply of oxygen

36. Benjamin Dinan

(with Dregia)

Ph.D. 2012 Growth of Titania Nanowires by Thermal Oxidation
37. Mark Andio

(with Morris)

Ph.D. 2012 Gas Sensing Based on Nano-structured Oxides
38. Haris Ansari

(with Dregia)

Ph.D. 2012 Self-assembled Nano-structures on Ceramic Oxides
39. Junro Yoon

(with Dutta)

Ph.D. 2012 A Study of Interface Reaction and Its Effect on

Li0.35La0.55TiO3-Li2CO3 Potentiometric CO2 Gas Sensors

40. Aiwen Tan (with Murphy at UM)* Ph.D. 2015 TiO2 nanofibers by thermal oxidation and biological cell tests*
41. Tharsika Thabothanayakam

(with Haseeb at UM)*

Ph.D. 2015 Synthesis and Characterization of Nano-structured Oxides*
42. Arafat Mahmood

(with Haseeb at UM)*

Ph.D. 2016 TiO2 nanofibers grown by oxidation and gas sensing*
43. Zhiyuan Niu

(with Dregia)

Ph.D. 2016 Nanoscale Self Patterning and Engineering of YSZ Surfaces
44. Ge Chen

(with S. Dregia)

M.S. 2016 Nanopatterning on metallic/ceramic systems via self-assembly and polymer system via replica molding
45. Derek Miller

(with P. Morris)

Ph.D. 2017 Advancing electronic structure characterization of semiconductor oxide nano-heterostructures for gas sensing
46. Soon Ginny (with Prof. Murphy at UM)* Ph.D. 2018 Surface Modification of Yttria-stabilized Zirconia at Nanoscale for in vitro Study
47. Mohamad Al-Hashem (with Morris) M.S. 2019 Plan A (non-thesis)
48. BuYu Yeh

(with Gouma)

M.S. 2019 Plan A (non-thesis)
49. Travis Peters M.S. 2019 Solid-State Yttria-Stabilized Zirconia Electrochemical Sensors for Extreme Environments
50. Nur Izzati (with Prof. Murphy at UM)* Ph.D. 2021 Investigation of the influence of self-assembled nanobars on cellular response in vitro
51. Janine Walker (with P. Morris) Ph.D. 2021 Selectivity mechanisms of gas-sensitive hetero-structural semiconducting metal oxides
52. Priyanka Karnati (with P. Morris) Ph.D. 2021 Design, Fabrication and Characterization of Core-shell Nanowires For Resistive Type Gas Sensing
53. Alex Vaeth M.S. 2021 Harsh environment sensors for simultaneous measurement of O2 and temperature
54. Ray Cowen

(with Prof. Grandinetti)

M.S. 2022 NMR Analysis of the Structural Role of Phosphorus in Aluminosilicate Glasses for Ion Exchange

*Co-advised students at University of Malaya, Kuala Lumpur, Malaysia